Difference between revisions of "Wake-up Calls"
From Zenitel Wiki
(→Wake-up Calls) |
|||
| (16 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | {{AI}} | |
| − | This feature can be used as a wake-up call, or | + | This feature can be used as a '''wake-up call''', or as a reminder of an appointment. When the entered wake-up time is reached, the station starts to ring. The ringing tone stops when a key is pressed on the station, or if the handset is lifted. |
| − | |||
| − | |||
By default, if the wake-up call is not cancelled, the station will stop ringing after 2 minutes. It will start to ring again up to 5 times, with 5 minutes between each time. | By default, if the wake-up call is not cancelled, the station will stop ringing after 2 minutes. It will start to ring again up to 5 times, with 5 minutes between each time. | ||
| − | * To enter the wake-up time: Dial 7883, enter the time (hour, minutes), enter the day (day, month) or press M if it is within 24 hours. | + | * To enter the wake-up time: Dial [[Wake-up call feature|7883]], enter the time (hour, minutes), enter the day (day, month) or press M if it is within 24 hours. |
* To delete a wake-up time set previously: Dial 7883 + M. | * To delete a wake-up time set previously: Dial 7883 + M. | ||
| + | * Wakeup can also be set by the data protocol message [[WAKE_UP]] | ||
== Additional Information == | == Additional Information == | ||
| − | * Wake-up can be programmed up to 10 months ahead | + | * Wake-up can be programmed up to 10 months ahead |
| − | * You can register only one wake-up time per station. If you program a new wake-up call, it will replace the first one | + | * You can register only one wake-up time per station. If you program a new wake-up call, it will replace the first one |
| − | * The wake-up time is only for one specific date - you can not program a wake-up that will be repeated automatically every day | + | * The wake-up time is only for one specific date - you can not program a wake-up that will be repeated automatically every day |
| − | * The exchange can register up to 200 wake-up calls | + | * Active wake-up is shown in the display (but with lower priority than conversation, mail, transfer/absent) |
| − | * The wake-up takes place no later than one minute after the programmed time | + | * The station is open for incoming calls |
| − | * Wake-up parameters (ringing time, time between calls, number of repetitions), can be changed | + | * The exchange can register up to 200 wake-up calls |
| − | + | * The wake-up takes place no later than one minute after the programmed time | |
| − | + | * Wake-up parameters (ringing time, time between calls, number of repetitions), can be changed from AlphaPro: [[Exchange_%26_System_(AlphaPro)#Calls_and_Options|Exchange & System > System > Calls and Options]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | [[Category: ICX-AlphaCom features]] | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
Latest revision as of 14:16, 3 June 2022
This feature can be used as a wake-up call, or as a reminder of an appointment. When the entered wake-up time is reached, the station starts to ring. The ringing tone stops when a key is pressed on the station, or if the handset is lifted.
By default, if the wake-up call is not cancelled, the station will stop ringing after 2 minutes. It will start to ring again up to 5 times, with 5 minutes between each time.
- To enter the wake-up time: Dial 7883, enter the time (hour, minutes), enter the day (day, month) or press M if it is within 24 hours.
- To delete a wake-up time set previously: Dial 7883 + M.
- Wakeup can also be set by the data protocol message WAKE_UP
Additional Information
- Wake-up can be programmed up to 10 months ahead
- You can register only one wake-up time per station. If you program a new wake-up call, it will replace the first one
- The wake-up time is only for one specific date - you can not program a wake-up that will be repeated automatically every day
- Active wake-up is shown in the display (but with lower priority than conversation, mail, transfer/absent)
- The station is open for incoming calls
- The exchange can register up to 200 wake-up calls
- The wake-up takes place no later than one minute after the programmed time
- Wake-up parameters (ringing time, time between calls, number of repetitions), can be changed from AlphaPro: Exchange & System > System > Calls and Options