1-1a. Exchange startup (solution): Difference between revisions
From Zenitel Wiki
(→Cards:) |
|||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:EX1-1a.PNG|left|600px]] | [[File:EX1-1a.PNG|left|thumb|600px|System configuration]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
__NOTOC__ | __NOTOC__ | ||
===Cards | ===Cards=== | ||
*Insert the ASLT card in position 1. | *Insert the [[ASLT]] card in position 1. | ||
*Insert the AMC-IP card in position 7. | *Insert the [[AMC-IP]] card in position 7. | ||
===Power | ===Power=== | ||
*Connect the power source to the plug on the back of the exchange, marked ''24 VAC IN'' | *Connect the power source to the plug on the back of the exchange, marked '''''24 VAC IN''''' | ||
*Connect the mains cable to the wall outlet | *Connect the mains cable to the wall outlet | ||
*Observe the exchange starting | *Observe the exchange starting | ||
===Coldstart | ===Coldstart=== | ||
*Press and hold the coldstart button on the AMC-IP board | *Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | ||
*Press the reset button on the power card briefly | *Press the reset button on the power card briefly | ||
*Keep the cold start button pressed at least 2 sec. after reset | *Keep the cold start button pressed at least 2 sec. after reset | ||
*The AMC status LED will blink green when the | *The AMC status LED will blink green when the system is up and running | ||
=== | ===Station connection=== | ||
* | *Connect the two master stations to physical port number 1 and 2 | ||
*Call the other station by dialling the directory number shown in the display | |||
<br><br><br><br> | |||
---- | |||
===Related articles === | |||
* [[1-1a. Exchange startup (practice)]] | |||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] | ||
Latest revision as of 09:02, 30 June 2022
Cards
Power
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset
- The AMC status LED will blink green when the system is up and running
Station connection
- Connect the two master stations to physical port number 1 and 2
- Call the other station by dialling the directory number shown in the display