Difference between revisions of "1-1a. Exchange startup (solution)"
From Zenitel Wiki
(→Coldstart:) |
(→Related articles) |
||
| (7 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
[[File:EX1-1a.PNG|left|thumb|600px|System configuration]] | [[File:EX1-1a.PNG|left|thumb|600px|System configuration]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
__NOTOC__ | __NOTOC__ | ||
| − | ===Cards | + | ===Cards=== |
*Insert the [[ASLT]] card in position 1. | *Insert the [[ASLT]] card in position 1. | ||
*Insert the [[AMC-IP]] card in position 7. | *Insert the [[AMC-IP]] card in position 7. | ||
| − | ===Power | + | ===Power=== |
*Connect the power source to the plug on the back of the exchange, marked '''''24 VAC IN''''' | *Connect the power source to the plug on the back of the exchange, marked '''''24 VAC IN''''' | ||
*Connect the mains cable to the wall outlet | *Connect the mains cable to the wall outlet | ||
*Observe the exchange starting | *Observe the exchange starting | ||
| − | ===Coldstart | + | ===Coldstart=== |
*Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | *Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | ||
*Press the reset button on the power card briefly | *Press the reset button on the power card briefly | ||
| − | *Keep the cold start button pressed at least 2 sec. after reset | + | *Keep the cold start button pressed at least 2 sec. after reset |
| − | *The AMC status LED will blink green when the | + | *The AMC status LED will blink green when the system is up and running |
| + | |||
| + | ===Station connection=== | ||
| + | *Connect the two master stations to physical port number 1 and 2 | ||
| + | *Call the other station by dialling the directory number shown in the display | ||
<br><br><br><br> | <br><br><br><br> | ||
| Line 23: | Line 26: | ||
===Related articles === | ===Related articles === | ||
| − | * [[Exchange startup (practice)]] | + | * [[1-1a. Exchange startup (practice)]] |
| − | |||
| − | |||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] | ||
Latest revision as of 09:02, 30 June 2022
Cards
Power
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset
- The AMC status LED will blink green when the system is up and running
Station connection
- Connect the two master stations to physical port number 1 and 2
- Call the other station by dialling the directory number shown in the display