Actions

Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"

From Zenitel Wiki

(Created page with "left|thumb|400px|System configuration <br style="clear:both;" /> === Exercise === *Text <br><br><br><br> ---- ===Related articles === * [[1-3d. IP St...")
 
(Related articles)
 
(17 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[File:1-3d config.PNG|left|thumb|400px|System configuration]]
+
[[File:1-3d config.PNG|left|thumb|500px|System configuration]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
=== Exercise ===
 
*Text
 
  
 +
__NOTOC__
  
<br><br><br><br>
+
=== Install and configure the X-Lite SIP client===
 +
* Download X-Lite from the internet http://www.counterpath.com/x-lite.html, and install it on the PC
 +
* During installation you are asked to create a SIP account. Fill in these parameters:
 +
[[File:1-3d solution2.png|thumb|left|400px|X-Lite: SIP account]]
 +
<br style="clear:both;" />
 +
* Change the IP address of the PC to 10.1.10.90, and subnet mask 255.255.0.0
 +
* Start the X-Lite
 +
 
 +
===Configure the AlphaCom XE===
 +
*In AlphaPro go to '''Users & Stations''', and select physical number 41; 141 Station 41
 +
*Use the section on the right and change the configuration as follows:
 +
[[File:1-3d solution1.png|thumb|left|400px|AlphaPro: Users & Stations window]]
 +
<br style="clear:both;" />
 +
 
 +
* Send the changes to the AlphaCom XE
 +
[[File:SendChg.PNG|400px]]
 +
 
 +
=== Troubleshooting ===
 +
* If the X-Lite does not register, check the following:
 +
** In AlphaWeb, System Configuration -> Filters, verify that ports for '''SIP''' and '''VoIP Audio''' are enabled
 +
** In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for '''SIP Stations'''<br><br><br><br>
  
 
----
 
----
Line 11: Line 30:
 
===Related articles ===
 
===Related articles ===
 
* [[1-3d. IP Stations – SIP Station X-Lite (practice)]]
 
* [[1-3d. IP Stations – SIP Station X-Lite (practice)]]
 +
 +
[[Category: AlphaCom practice]]

Latest revision as of 10:05, 30 June 2022

System configuration



Install and configure the X-Lite SIP client

X-Lite: SIP account


  • Change the IP address of the PC to 10.1.10.90, and subnet mask 255.255.0.0
  • Start the X-Lite

Configure the AlphaCom XE

  • In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
  • Use the section on the right and change the configuration as follows:
AlphaPro: Users & Stations window


  • Send the changes to the AlphaCom XE

SendChg.PNG

Troubleshooting

  • If the X-Lite does not register, check the following:
    • In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
    • In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations




Related articles