Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"

Latest revision as of 10:05, 30 June 2022

System configuration

Download X-Lite from the internet http://www.counterpath.com/x-lite.html, and install it on the PC
During installation you are asked to create a SIP account. Fill in these parameters:

X-Lite: SIP account

In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
Use the section on the right and change the configuration as follows:

AlphaPro: Users & Stations window

If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations

@@ Line 5: / Line 5: @@
 === Install and configure the X-Lite SIP client===
-* Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC
+* Download X-Lite from the internet http://www.counterpath.com/x-lite.html, and install it on the PC
 * During installation you are asked to create a SIP account. Fill in these parameters:
-[[File:1-3d solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]]
+[[File:1-3d solution2.png|thumb|left|400px|X-Lite: SIP account]]
 <br style="clear:both;" />
-* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
+* Change the IP address of the PC to 10.1.10.90, and subnet mask 255.255.0.0
-* Start the SoftClient, and select '''File''' -> '''Preferences''', and set these parameters:
+* Start the X-Lite
-* '''Save Settings'''
-* Select '''Configure Audio Device''' to adjust speaker and microphone levels
 ===Configure the AlphaCom XE===
@@ Line 32: / Line 30: @@
 ===Related articles ===
 * [[1-3d. IP Stations – SIP Station X-Lite (practice)]]
+[[Category: AlphaCom practice]]