Difference between revisions of "Pulsing of RCO (Event Handler)"

Latest revision as of 10:34, 8 July 2022

A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.

The stations dial an Event Trigger number (feature 85), say number 9533, to pulse the RCO 3 for 5 seconds.

First, assign the stations to UDP group 1.

Second, in AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:

Action commands:

RCO 3 ON 50

@@ Line 1: / Line 1: @@
-Using the $ST (Set_Timer) message.
+{{AI}}
-<br\>
+===Function required===
-A number of stations should dial an Event Trigger number 9533 (feature 85) to pulse RCO 3 for 5 seconds. Assign the stations to UDP group 1.
+A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.
-'''Start a 5 sec. timer when 9534 is dialled:'''
+=== Solution ===
+The stations dial an Event Trigger number ([[Event Trigger with cancel tone feature|feature 85]]), say number 9533, to pulse the [[RCO]] 3 for 5 seconds.
+First, assign the stations to [[UDP|UDP group 1]].
+Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
+[[File:Application20.png|left|thumb|500px]]
+<br style="clear:both;" />
+{{Code2|
+ RCO 3 ON 50
+}}
+[[Category:AlphaCom Applications]]
+[[Category: ICX-AlphaCom Applications]]
+[[Category:Applications using Event Handler]]