Actions

Difference between revisions of "Pulsing of RCO (Event Handler)"

From Zenitel Wiki

 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Using the $ST (Set_Timer) message.
+
{{AI}}
<br\>
+
===Function required===
A number of stations should dial an Event Trigger number 9533 (feature 85) to pulse RCO 3 for 5 seconds. Assign the stations to UDP group 1.
+
A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.  
  
In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
+
=== Solution ===
------------
+
The stations dial an Event Trigger number ([[Event Trigger with cancel tone feature|feature 85]]), say number 9533, to pulse the [[RCO]] 3 for 5 seconds.  
'''Event 1''' - Start a 5 sec. timer when 9534 is dialled.
 
{|
 
|-
 
|width="100pt"|'''Event Owner''':
 
|width="400pt"|Stations w/UDP Id: 1
 
|-
 
|'''Event type''': || [[Event Trigger (Event Type)|15 – Event Trigger]]
 
|-
 
|'''When change to''': || ON or OFF
 
|-
 
|'''When related to''': || Directory Number, Id: 9533
 
|-
 
|'''Action''': || RCO 3 ON
 
|-
 
| &nbsp; || $[[SET TIMER|ST]] L%1.dir w50 L%2.dir
 
|-
 
|}
 
  
------------
+
First, assign the stations to [[UDP|UDP group 1]].
'''Event 2''' - Cancel conversation when timeout.
 
{|
 
|-
 
|width="100pt"|'''Event Owner''':
 
|width="400pt"|Stations w/UDP Id: 1
 
|-
 
|'''Event type''': || [[Event Timeout (Event Type)|21 - Event timeout]]
 
|-
 
|'''When change to''': || ON
 
|-
 
|'''When related to''': || Directory Number, Id: 9533
 
|-
 
|'''Action''': || RCO 3 OFF
 
|-
 
|}
 
  
------------
+
Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
 +
[[File:Application20.png|left|thumb|500px]]
 +
<br style="clear:both;" />
  
 +
{{Code2|
 +
RCO 3 ON 50
 +
}}
  
[[Category:Applications]]
+
 
 +
 
 +
 
 +
 
 +
[[Category:AlphaCom Applications]]
 +
[[Category: ICX-AlphaCom Applications]]
 +
[[Category:Applications using Event Handler]]

Latest revision as of 11:34, 8 July 2022

AI.png

Function required

A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.

Solution

The stations dial an Event Trigger number (feature 85), say number 9533, to pulse the RCO 3 for 5 seconds.

First, assign the stations to UDP group 1.

Second, in AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:

Application20.png


Action commands:

RCO 3 ON 50