Difference between revisions of "Pulsing of RCO (Event Handler)"
From Zenitel Wiki
(→Solution) |
|||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{AI}} | ||
===Function required=== | ===Function required=== | ||
A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds. | A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds. | ||
=== Solution === | === Solution === | ||
| − | The stations dial an Event Trigger number (feature 85), say number 9533, to pulse the [[RCO]] 3 for 5 seconds. | + | The stations dial an Event Trigger number ([[Event Trigger with cancel tone feature|feature 85]]), say number 9533, to pulse the [[RCO]] 3 for 5 seconds. |
| − | First, assign the stations to UDP group 1. | + | First, assign the stations to [[UDP|UDP group 1]]. |
Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | Second, in [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | ||
| − | + | [[File:Application20.png|left|thumb|500px]] | |
| − | + | <br style="clear:both;" /> | |
| − | |||
| − | | | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | {{Code2| | ||
| + | RCO 3 ON 50 | ||
| + | }} | ||
| − | [[Category:Applications]] | + | |
| + | |||
| + | [[Category:AlphaCom Applications]] | ||
| + | [[Category: ICX-AlphaCom Applications]] | ||
| + | [[Category:Applications using Event Handler]] | ||
Latest revision as of 10:34, 8 July 2022
Function required
A selection of intercom stations should, by dialing a number on the keypad, or by pressing a DAK key, be able to pulse a relay for 5 seconds.
Solution
The stations dial an Event Trigger number (feature 85), say number 9533, to pulse the RCO 3 for 5 seconds.
First, assign the stations to UDP group 1.
Second, in AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
Action commands:
RCO 3 ON 50