|
|
| (4 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − |
| |
| | {|border="1" | | {|border="1" |
| | |width="250px"| | | |width="250px"| |
| Line 7: |
Line 6: |
| | |TKIS-2 || 65 x 80 x 25 mm || 0.1 kg | | |TKIS-2 || 65 x 80 x 25 mm || 0.1 kg |
| | |} | | |} |
| − |
| |
| − | [[File:TCIS Mounting-1.PNG|thumb|700px|left]]
| |
| − | [[File:TKIS-2.PNG|thumb|300px|left|TKIS-2]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | =TCIS Compact Station Dimensions=
| |
| − | [[File:TCAS Dimmensions-2.PNG|200px|''TCIS Compact Station - Front view'']]
| |
| − | [[File:TCIS Dimensions 1.PNG|200px|''TCIS Compact Station - Side view'']]
| |
| − |
| |
| − | <br style="clear:both;" />
| |
| | | | |
| | =TKIS-2 Dimensions= | | =TKIS-2 Dimensions= |
| − | [[File:TKIS-2-Dimensions.PNG|200px|''TKIS-2 -Front view'']] | + | [[File:TKIS-2-Dimensions.PNG|400px|''TKIS-2 -Front view'']] |
| − | [[File:TKIS-2-Dimensions1.PNG|200px|''TKIS-2 -Side view'']] | + | [[File:TKIS-2-Dimensions1.PNG|400px|''TKIS-2 -Side view'']] |
| − | | |
| − | =Onwall Surface Mounting=
| |
| − | ==On-Wall Surface Mount Back Box - TA-1==
| |
| − | Mounting holes are to be drilled as shown.
| |
| − | | |
| − | Max. recommended screw diameter: ISO M6 or ANSI 1/4". Screw length must be greater than 25 mm or 1". A4 stainless steel socket head screws/bolts are recommended. Max. recommended screw head diameter: 9.5 mm or 3/8".
| |
| − | | |
| − | Optional nylon washers for extra protection against corrosive effects between surfaces are provided. They should be placed at the bottom of the mounting holes.
| |
| − | Grommets and an M20 cable gland are provided.
| |
| − | | |
| − | [[File:TCAS Mounting-1.PNG|500px|''Onwall backbox Mounting holes - Side view'']]
| |
| − | [[File:TCAS Mounting-2.PNG|200px|''Onwall backbox - Side view'']]
| |
| − | | |
| − | <br style="clear:both;" />
| |
| − | | |
| − | ==On-Wall Surface Mounting Procedure==
| |
| − | | |
| − | [[File:TCAS Mounting-3.PNG|''Onwall mounting - exploded view'']]
| |
| − | | |
| − | :1. Mount the back box onto the wall
| |
| − | :2. Fit the gasket onto the back box with the ridged side facing down
| |
| − | ::–Plug the Ethernet cable into the RJ-45 port on the station
| |
| − | :3. Mount the Turbine station onto the back box with the M5 fasteners provided
| |
| − | | |
| − | '''Note!''' Use the grommets and M20 cable gland provided for the cable holes on the back box
| |
| − | | |
| − | =Flush Mounting=
| |
| − | ==Flush Mount 2-Gang Back Box - TA-3==
| |
| − | [[File:TCAS Mounting-4.PNG|''TA2 2-Gang backbox dimensions'']]
| |
| − | | |
| − | '''Note!''' It is recommended to utilize back boxes with weep holes at the bottom
| |
| − | | |
| − | <br style="clear:both;" />
| |
| − | | |
| − | ==Flush Mount Bracket - TA-5==
| |
| − | Fits US 2-GANG electrical boxes. Recommended screw diameter: up to M4 (5/32"). Use screw recommended by back box manufacurer.
| |
| − | | |
| − | [[File:TCAS Mounting-5.PNG|''TA-5 Mounting Bracket dimensions'']]
| |
| − | [[File:TCAS Mounting-6.PNG|''TA-5 Mounting Bracket'']]
| |
| − | | |
| − | '''Note!''' The TA-5 Bracket is mandatory for flush mounting.
| |
| − | | |
| − | <br style="clear:both;" />
| |
| − | | |
| − | ==Flush Mounting Procedure==
| |
| − | [[File:TCAS Mounting-7.png]]
| |
| − | | |
| − | :1. Mount the 2-gang back box into the wall
| |
| − | :2. Mount the bracket onto the back box
| |
| − | :3. Fit the gasket onto the bracket with the ridged side facing down
| |
| − | ::–Plug the Ethernet cable into the RJ-45 port on the station
| |
| − | :4. Mount the Turbine station onto the bracket with the M5 fasteners provided
| |
| | | | |
| − | [[Category: Turbine]] | + | [[Category: Turbine Dimensions & Mounting Instructions]] |
