Latest revision as of 20:48, 2 October 2024

Previous Release - Turbine 8.2 - Release notes

This document provides the release notes for VSF-Turbine 9.0 with incremental bug fix releases. The release notes for VSF-Turbine 9.0 describe new features, improvements and issues fixed after VSF-Turbine 8.2.3.3.

Release info

Name: VSF-Turbine
Description: VSF-Turbine is a firmware archive for Zenitel devices based on the IMX28 processor.

The firmware is delivered in two different ZIP archives and one swu file:

vsft-9.0.x.x - Used for standard in-field upgrades
vsft-prod-9.0.x.x - Used in production- and recovery upgrades

Version: vsft-9.0.3.0
Date: xx.10.2024
Status: General Availability

VSF-TURBINE 9.0.3.0

Improvements

Fixed Issues

Known Issues

MTN-4454 Multicast paging configuration is lost after upgrade to 8.2.3.0

As from 8.2.3.0, the multicast configuration in SIP and Edge mode is stored in a different format. Unfortunately, the configuration is lost after upgrade from a previous software version.

MTN-4049 IP Heavy Duty Telephone shows speaker volume setting when in Edge Controller mode

IP Heavy Duty Telephones do not have a speaker, this has been disabled in the device model. The setting option in Edge Controller mode does not do anything and should be ignored

MTN-3299 TLS Private Keys not restored on Turbine stations

In case that TLS Private Keys are deleted from Turbine station, the only way to restore them is to manually upload them to the station. Factory reset or station upgrade will not restore TLS Private Keys.

MTN-2686 Outputs not working for Exigo amplifiers in SIP mode

GPO's does not work when exigo amplifiers are in SIP mode.

@@ Line 30: / Line 30: @@
 ==Known Issues==
+===MTN-4454 Multicast paging configuration is lost after upgrade to 8.2.3.0===
+As from 8.2.3.0, the multicast configuration in SIP and Edge mode is stored in a different format. Unfortunately, the configuration is lost after upgrade from a previous software version.
 ===MTN-4049 IP Heavy Duty Telephone shows speaker volume setting when in Edge Controller mode===
 IP Heavy Duty Telephones do not have a speaker, this has been disabled in the device model. The setting option in Edge Controller mode does not do anything and should be ignored
@@ Line 39: / Line 42: @@
 GPO's does not work when exigo amplifiers are in SIP mode.
-===MTN-2363 Factory reset does not delete uploaded Script===
-All uploaded scripts should also be removed on Factory reset
-===MTN-2362 H.264 RTSP stream in UDP mode can display small artifacts at the bottom of the stream===
-H.264 RTSP stream in UDP mode can display small artifacts at the bottom of the stream.
-===MTN-2361 TCIV H264 stream does not work in Honeywell Maxpro NVR===
-RTSP H.264 does not work in Honeywell Maxpro NVR, workaround is to use MJPEG RTSP stream
-===MTN-2360 Client side forwarding does not work in SIP mode===
-Client side forwarding, which can be configured as a DAK action or activated from INCA display menu, does not work in SIP mode. Workaround is to use SIP server side forwarding.
-===MTN-2359 Stream is not always established in Pelco VideoExpert VMS version 3.0 or newer===
-Stream is not always established in Pelco VideoExpert VMS version 3.0 or newer, workaround is to follow all the steps described here https://wiki.zenitel.com/wiki/Adding_TCIV_ONVIF_camera_to_Pelco_VideoXpert_Professional when adding TCIV station to Pelco VideoExpert
-===MTN-2358 Making a point-to-point call during High priority Group call will drop group call audio.===
-When 2 stations establish a point-to-point call during High priority Group call, they will no longer receive audio from current High priority group call.
-===MTN-2356 SNMP not working properly on TCIV under high CPU load===
-SNMP is not working properly on TCIV under high CPU load, which means that SNMP traps and inform messages can be sent with delay, or not be sent at all. This only happens if TCIV is placed under very high load, under normal operating conditions SNMP function without any issues.
-===MTN-2339 Group call chime is not played on 3rd party SIP stations===
-Group call chime (WAV file) is not played on third party SIP devices when Group Call is set over multicast IP address.
-===MTN-1073 Group call fails if system previously configured with ZAP===
-If system was configured with ZAP (VS-IMT Pulse SDK project) and then switched to XML configuration by deleting data.lua file, it is possible that Group Calls shall not work. A workaround is that (1) data.lua file is deleted from all stations including Pulse server - this will reboot stations, and (2) after reboot go to Server configuration -> Save + Apply - this will again reboot all stations.
 [[Category: Release notes]]

Difference between revisions of "Turbine 9.0 - Release notes"

From Zenitel Wiki