Latest revision as of 13:31, 3 October 2024

Previous Release - VSF-Fortitude6 8.2 Release Notes

This document provides the release notes for VSF-Fortitude6 9.0 with incremental bug fix releases. The release notes for VSF-Fortitude6 9.0 describe new features, improvements and issues fixed after VSF-Fortitude6 8.2.3.3.

Release info

Name: VSF-Fortitude6
Description: VSF-Fortitude6 is a firmware for Zenitel devices based on the IMX6 processor.

The firmware is delivered in two different files:

vsff6-9.0.3.x - Used for standard in-field upgrades
vsff6-prod-9.0.3.x - Used in production- and recovery upgrades.

Version: 9.0.3.0
Date: 03.10.2024
Status: General Availability

VSF-FORTITUDE6 9.0.3.0

Improvements

MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages

Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.

MTN-3557 New configuration option for RTSP Audio Source

There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.

DS-1034 Added support for codec L16x48 to Multicast Paging config

Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.

DS-970 Added multicast relay feature

Device can now relay incoming RTP to specified address and port.

DS-889 Operate output when the call button is pressed in idle

Added option to configure operation of relays and outputs when the call button is pressed.

Fixed Issues

DS-1015 Permanent Audio Stream fixes and config refresh

Some parts of the audio stream config was not working correct and mic level was very low. Also linked to RTSP “Audio Source” config for impact which signal is sent to RTP stream. Consult wiki documentation for more details.

@@ Line 20: / Line 20: @@
 =VSF-FORTITUDE6 9.0.3.0=
 == Improvements==
-===DS-899 SIP/SDP support for dynamic payload for codec L16x48 (HD-Audio)===
+=== MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages===
-Now supporting SIP media attribute L16/48000 with dynamic payload type in range 96..127.
+Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.
-Note! The device needs to be configured in “HD-Audio” mode and voice processing (AEC and NC) is not supported.
-<br>
+=== MTN-3557 New configuration option for RTSP Audio Source===
+There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.
-==Fixed Issues==
+=== DS-1034 Added support for codec L16x48 to Multicast Paging config===
-=== MTN-4435 RTSP stream could stop in some cases===
+Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.
-In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.
-=== MTN-4394 Multicast paging working again on intercom devices===
+=== DS-970 Added multicast relay feature===
-Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.
+Device can now relay incoming RTP to specified address and port.
-=== MTN-4362 Fixed wrong description in Sound Detection settings===
+=== DS-889 Operate output when the call button is pressed in idle===
+Added option to configure operation of relays and outputs when the call button is pressed.
-The description of “Minimum time before reactivation” is corrected to
-“Choose how long to wait before enabling VAD after triggering the DAK key”
-=== MTN-4340 ONVIF backchannel could cut last second of audio===
+<br>
-In some cases backchannel could cut around last second of audio when using push to talk or pre-recorded messages that terminate backchannel session.
-This does not happen anymore if client sends TEARDOWN command correctly.
-=== MTN-4329 Fixed an issue with wrong intervals for ONVIF events reports===
-Fixed an issue with wrong parsing of some PullMessages parameters. In some VMSs, PullMessages parameters Timeout and MessageLimit were not parsed correctly on VS-IS8.0.3.2 and wrong values were used.
-=== MTN-4320 Weak cipher suites no longer supported on devices===
-Removed the AES128-SHA AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-RSA-AES256-SHA:CAMELLIA128-SHA:CAMELLIA256-SHA ciphers reported by security scanner
-===MTN-4246 Fixed an issue with input status on CRM-V2 that was lost after ICX-AlphaCom restart===
-After ICX-AlphaCom was restarted the input status of the CRM-V2 was lost. This is now fixed.
-=== MTN-4228 Turbine devices could not be used with Bosch VMS===
-There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.
+==Fixed Issues==
+=== DS-1015 Permanent Audio Stream fixes and config refresh===
+Some parts of the audio stream config was not working correct and mic level was very low. Also linked to RTSP “Audio Source” config for impact which signal is sent to RTP stream.
+Consult wiki documentation for more details.

Difference between revisions of "VSF-Fortitude6 9.0 Release Notes"

From Zenitel Wiki