Revision as of 14:39, 31 January 2025

Previous Release - VSF-Fortitude6 9.0 Release Notes

This document provides the release notes for VSF-Fortitude6 9.1 with incremental bug fix releases. The release notes for VSF-Fortitude6 9.1 describe new features, improvements and issues fixed after VSF-Fortitude6 9.0.3.3.

Release info

Name: VSF-Fortitude6
Description: VSF-Fortitude6 is a firmware for Zenitel devices based on the IMX6 processor.

The firmware is delivered in two different files:

vsff6-9.1.3.x - Used for standard in-field upgrades
vsff6-prod-9.1.3.x - Used in production- and recovery upgrades.

Version: 9.1.3.0
Date: 31.01.2025
Status: General Availability

VSF-FORTITUDE6 9.1.3.0

Fixed Issues

MTN-4511 Authentication is now required to access all web pages

MTN-4454 Fixed issue where multicast paging configuration is lost after upgrade

As from 8.2.3.0, the multicast configuration in SIP and Edge mode is stored in a different format and would be lost on upgrade. From 9.0.3.3, configuration is transferred.

Improvements

DS-1152 Added a configuration option in "Call Settings" i the device web for not encode the “#” as “%23” in sip invite URIs

DS-958 New option added to factory reset the device with keeping IP settings

With the new option under Main Settings page, it is now possible to factory reset the device with keeping IP, firewall and 802.1X settings.

@@ Line 29: / Line 29: @@
 == Improvements==
-===MTN-4558 RTSP/ONVIF backchannel loudspeaker audio feedback to mic RTSP channel===
+=== DS-1152	Added a configuration option in "Call Settings" i the device web for not encode the “#” as “%23” in sip invite URIs===
-If a VMS system opens both the device loudspeaker backchannel and mic listen channel at the same time a full feedback will be heard on far-end. The loudspeaker backchannel is still routed outside AEC algorithm, but fixed for now by always muting mic RTP channel when backchannel is active.
-=== MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages===
+=== DS-958 New option added to factory reset the device with keeping IP settings ===
-Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.
+With the new option under Main Settings page, it is now possible to factory reset the device with keeping IP, firewall and 802.1X settings.
-=== MTN-3557 New configuration option for RTSP Audio Source===
-There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.
-=== DS-1034 Added support for codec L16x48 to Multicast Paging config===
-Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.
-=== DS-970 Added multicast relay feature===
-Device can now relay incoming RTP to specified address and port.
-=== DS-889 Operate output when the call button is pressed in idle===
-Added option to configure operation of relays and outputs when the call button is pressed.
@@ Line 51: / Line 38: @@
-<br>

VSF-Fortitude6 9.1 Release Notes: Difference between revisions

From Zenitel Wiki