DISPLAY TEXT

DISPLAY_TEXT		0x005A	90	AMC 06.00
$DSPL L101 U18 0311 ‘Line 1 text’ $DSPL L101 U18 0312 ‘Line 2 text’ $DSPL L104 U23 0313 14 "Line 3 text on CRM " $DSPL L104 U23 0313 54 "Line 4 text on CRM " Dual Display (from AMC 08.28 / 09.01): 1. $DSPL L104 U11 33011302 ‘DAK line’ 2. $DSPL L104 U3 500400 ‘’ IP station Custom Command (From AMC 10.30) $DSPL L101 U4 60AB0812 ‘’ > DIP message
Send text and control characters to a station in a station dependent low level format. The character set is ISO 8859 (for characters from 20 hex and above). The control characters used conforms to the TouchLine display format code for control of the display. AlphaNet: Message from remote exchange in order to display the enclosed text in a local station. Note 1: The exchange updates the display frequently, and external control of the display will work only in special situations Note 2: The text must be within apostrophes ('....') and not closing single quotation marks (‘…’) . The text editor Word (and others) tends to convert apostrophes to single quotation marks, which will not work. Dual Display: Example 1. Update text on DAK display line 02. legal values 01->64 (1-100 decimal) Example 2. Select (show) DAK page 04 on DualDisplay station with no arrow indication (last 00. Arrow down is visible if (last) number is 2 or more. Arrow up is visible if number is larger than the page number).
1	NET_OBJ_REF {ECL_STATION}	Station displaying text. AlphaNet: B station in B exchange. Null value not allowed.
2	UINT1	Length of text
3	Array of UINT1	Text characters.

IP station Custom Command (DIP)

LINE 1: $DIP N%1.phy "dite 1 1 0 0 8 TEXT"

LINE 2: $DIP N%1.phy "dite 1 1 0 0 17 TEXT"

LINE 3: $DIP N%1.phy "dite 1 1 0 0 26 TEXT"

LINE 4: $DIP N%1.phy "dite 1 1 0 0 35 TEXT"

• Explanation: <ref> dite <disp> <font_> <flags> <posx> <posy> <text>
• ref: Physical number for addressed station.
• disp: Display number.
  • 1 = Main display (size 128x64 pixels).
  • 2 = Dak display.
• font_: Font type
  • 1 = 5x8 (horizontal spacing +1 pixel = 6 pixels width).
  • 2 = 8x15 (horizontal spacing included).
  • 3 = 10x16 (horizontal spacing +2 pixels = 12 pixels width).
• flags: Flags
  • 0001 = Inverted.
• posx: Horizontal position from left to right. Denotes left edge position of first character.
  • Hex value (Main display: 00-7F = 128 pixels)
• posy: Vertical position from top to bottom. Denotes top edge position of first character.
  • Hex value (Main display: 00-3F = 64 pixels)
• text: Display text coded as UTF-8

Back to AlphaNet message list