TKIV+ Dimensions & Mounting Instructions: Difference between revisions
From Zenitel Wiki
No edit summary |
|||
| (8 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{AEIS}} | {{AEIS}} | ||
=Dimensions CPU module= | =Dimensions CPU module= | ||
[[File:TKIV CPU | [[File:TKIV Dim CPU.PNG|thumb|left|600px|TKIV+ CPU module dimensions]] | ||
<br clear=all/> | <br clear=all/> | ||
= | =Dimensions Camera module= | ||
[[File:TKIV | [[File:TKIV Dim Cam.PNG|border|left|600px|TKIV+ Camera Module dimensions]] | ||
<br clear=all/> | <br clear=all/> | ||
=TKIV+ Camera Module Mounting instruction= | =TKIV+ Camera Module Mounting instruction= | ||
| Line 32: | Line 20: | ||
{{note|Make sure that the distance between the CPU module and the camera unit does not exceed 50 mm so as not to strain the cable.}} | {{note|Make sure that the distance between the CPU module and the camera unit does not exceed 50 mm so as not to strain the cable.}} | ||
[[File:Flat_Cable_length.png|thumb|left| | [[File:Flat_Cable_length.png|thumb|left|600px|Flat Cable length]] | ||
<br clear=all/> | <br clear=all/> | ||
| Line 57: | Line 45: | ||
== Connecting the Flat Cable to the Camera unit == | == Connecting the Flat Cable to the Camera unit == | ||
[[File:Flat_Cable_camera.png|thumg| | [[File:Flat_Cable_camera.png|thumg|left|200px|Flat Cable into the Camera unit]] | ||
# Open the FFC contact on the camera unit by carefully lifting the lever at both ends. | # Open the FFC contact on the camera unit by carefully lifting the lever at both ends. | ||
# Thread the flat cable through the strain relief on the camera unit. | # Thread the flat cable through the strain relief on the camera unit. | ||
Latest revision as of 15:24, 14 October 2025
Dimensions CPU module
Dimensions Camera module
TKIV+ Camera Module Mounting instruction
The installation should be performed in an ESD Safe working environment using a flat-head screwdriver.
The flat cable comprises one side that has a blue tape and one side that has the contact.
|
Make sure that the distance between the CPU module and the camera unit does not exceed 50 mm so as not to strain the cable. |
Connecting the Flat Cable to the CPU Module
1. Use a flat-head screwdriver to release the snap locks on both short sides of the CPU module and gently pry the cover off.
 |
2. Open the FFC contact on the CPU board by carefully lifting the lever at both ends.
 |
3. Insert the cable into the contact with the blue tape side facing up and the contact side facing down.
 |
4. Close the contact by pressing down the lever at both ends simultaneously.
|
Connecting the Flat Cable to the Camera unit
- Open the FFC contact on the camera unit by carefully lifting the lever at both ends.
- Thread the flat cable through the strain relief on the camera unit.
- Insert the cable into the contact with the contact side facing up and the blue tape side facing down.
- Close the contact by pressing down the lever at both ends simultaneously.