Actions

Difference between revisions of "SEND TXT MAIL"

From Zenitel Wiki

Line 4: Line 4:
 
!style="background:#ffdead;" width="100pt"|0x0032
 
!style="background:#ffdead;" width="100pt"|0x0032
 
!style="background:#ffdead;" width="30pt"|50
 
!style="background:#ffdead;" width="30pt"|50
!style="background:#ffdead;" width="100pt"|AMC 05.00
+
!style="background:#ffdead;" |AMC 05.00
 
|-
 
|-
 
|colspan="5"|'''$STM L101 L102 U100 'text 16''''
 
|colspan="5"|'''$STM L101 L102 U100 'text 16''''

Revision as of 15:15, 25 October 2007

SEND_TXT_MAIL 0x0032 50 AMC 05.00
$STM L101 L102 U100 'text 16'
Send a mail message with free text to an intercom station.
1 NET_OBJ_REF<br\>{ECL_STATION} Sending station.<br\>Null value allowed.
2 NET_OBJ_REF<br\>{ECL_STATION,<br\>ECL_ST_GROUP} Receiving station or local group.<br\>.<br\>.
3 UINT1 Mail Priority 0 - 255. Same as SEND_MAIL#Mail_priority.
4 TEXT16 Free text (16 characters).
5 UINT1<br\>(optional 08.11) Mail Flags:<br\> Same as SEND_MAIL#Mail flags.<br\>-Combinations of bits allowed.<br\>-Default 0. AMC 07.00
6 TEXT16<br\>(optional 07.60) Name of sending station (16 character).<br\>Default value: Sending station’s name. AMC 07.00
7 UINT1<br\>(optional 07.60) User Defined Properties (UDP) of the sending station.<br\>Default value: 0.<br\>Note: If Parameter 7 is used, this parameter MUST be filled in also. AMC 07.00
8 UINT1<br\>(optional) Hop Count. AlphaNet: Used to avoid endless mail forwarding. Incremented by AMC, discarded when too large.<br\>Default value: 0.
Response: SEND_MAIL_ACK, SET_CALL_REQ_MODE


Back to AlphaNet message list