Difference between revisions of "Station ID for MLH/CRM feature"
From Zenitel Wiki
| Line 10: | Line 10: | ||
|'''Parameter 1''': || 0 (N/A) | |'''Parameter 1''': || 0 (N/A) | ||
|-valign="top" | |-valign="top" | ||
| − | |'''Description''': || Some Control Room stations based on the [[MPC Data Protocol]] must be told automatically what directory number the audio line has. In addition, the station stays in a programming mode where all digits dialled on the keypad are just sent out of the exchange on the | + | |'''Description''': || Some Control Room stations based on the [[MPC Data Protocol]] must be told automatically what directory number the audio line has. In addition, the station stays in a programming mode where all digits dialled on the keypad are just sent out of the exchange on the MPC data protocol. The station then uses this e.g. to program dialler keys. |
Procedure: Dial 786. A success tone is heard, and the station LED blinks two times rapidly (double-blink), then waits for digits. The feature is cancelled with the C key. | Procedure: Dial 786. A success tone is heard, and the station LED blinks two times rapidly (double-blink), then waits for digits. The feature is cancelled with the C key. | ||
Revision as of 20:24, 8 January 2008
| Feature: | Station ID for MLH/CRM |
| Default directory number: | 786 |
| Feature number: | 43 |
| Parameter 1: | 0 (N/A) |
| Description: | Some Control Room stations based on the MPC Data Protocol must be told automatically what directory number the audio line has. In addition, the station stays in a programming mode where all digits dialled on the keypad are just sent out of the exchange on the MPC data protocol. The station then uses this e.g. to program dialler keys.
Procedure: Dial 786. A success tone is heard, and the station LED blinks two times rapidly (double-blink), then waits for digits. The feature is cancelled with the C key. Data generated on the MPC Data Protocol:
|