IP Substation Indication LEDs: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
== Status LED == | == Status LED == | ||
Blinking 2 red + 1 green | '''Blinking 2 red + 1 green''': Station does not have connection to the AlphaCom E exchange | ||
Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been | '''Blinking 1 red + 2 green''':Station has connection to AlphaCom E exchange, but has not been registered | ||
'''Blinking 3 green''': Station connected and registered in the AlphaCom E exchange | |||
Blinking 3 green | |||
LAN LEDs (on LAN and AUX RJ45-jacks) | == LAN LEDs (on LAN and AUX RJ45-jacks) == | ||
Left green LED: | '''Left green LED''': | ||
* Steady light Ethernet connection OK | |||
* Blinking Ethernet traffic | |||
* No light No Ethernet connection | |||
Right amber LED: | '''Right amber LED''': | ||
* Light 100 Mbit Ethernet connection | |||
* No light 10 Mbit Ethernet connection | |||
[[Category: Stations]] | [[Category: Stations]] | ||
[[Category: IP Stations]] | [[Category: IP Stations]] | ||
Revision as of 21:41, 10 October 2007
Station LED (on board and in front plate)
Blinking at 1 second interval: Station does not have connection to the AlphaCom E exchange.
- Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom E IP address configured
- Invalid IP address
- No or wrong gateway to the AlphaCom E exchange
Blinking at 5 seconds interval: Station has connection to the AlphaCom E exchange, but has not been registered.
- Reason:
- Station has not been programmed in AlphaPro
No blinking
- Possible reasons:
- Station connected and registered to the AlphaCom E exchange - All OK
- Station not powered up (if no other LEDs are active)
Status LED
Blinking 2 red + 1 green: Station does not have connection to the AlphaCom E exchange Blinking 1 red + 2 green:Station has connection to AlphaCom E exchange, but has not been registered Blinking 3 green: Station connected and registered in the AlphaCom E exchange
LAN LEDs (on LAN and AUX RJ45-jacks)
Left green LED:
- Steady light Ethernet connection OK
- Blinking Ethernet traffic
- No light No Ethernet connection
Right amber LED:
- Light 100 Mbit Ethernet connection
- No light 10 Mbit Ethernet connection