Dynamic group call

Operation (CRM IV)

• Press the "Group Config." button, red led in key starts flashing
• Select subscribers to be included / excluded (toggle function), flashing green led in key indicate included
• Press the "Group Config." button again, the group call is activated, red led in key stops flashing
• The green leds continue to flash during the group call
• When the group call is cancelled the group is emptied, and the green leds stop flashing

LIMITATION: You can only include subscribers, you cannot include groups!

Programming

• Software requirement: AMC 8.26 is later
• If not already existing, create 9535 = feature 95/0. The "Group Config." DAK button is programmed to 9535.

• Each CRMIV must “own” a group call that nobody else uses. The directory number of the group call should be changed so that the two last digits are identical to the group index number.

Example:

• • Group 2 = 8502
  • Group 10 = 8510

Etc.

• Enter the group call directory number associated to the CRMIV in the External Parameter (%1.EXP) field of the CRM IV.
• Put all CRM IV’s that should have Dynamic Group Call feature in UDP group 1.

Event Handler programming

Event 1:

Event Owner:	Stations w/UDP 1 (CRM IV stations)
Event type:	15 – Event Trigger
Subevent:	0
When change to:	ON or OFF
When related to:	Directory number: 9535
Action:	IND %1.phy %1.dak(I%2.dir) 1 3

Event 2:

Event Owner:	Stations w/UDP 1 (CRM IV stations)
Event type:	25 – Event trigger with parameter
Subevent:	0
When change to:	ON or OFF
When related to:	All
Action:	IF %sgm(%2.phy,%1.exp(2))
	IND %1.phy %1.dak(I%2.dir) 2 3 OFF
	ENDIF
	IF %op(%sgm(%2.phy,%1.exp(2)),=,0)
	IND %1.phy %1.dak(I%2.dir) 2 3 ON
	ENDIF
	$GRM L%2.dir NG%1.exp(2) U2
	IF %op(%2.dir,=,9535)
	$DISCON_ST L%1.dir 0
	IND %1.phy %1.dak(I%2.dir) 2 3 OFF
	pause
	pause
	pause
	$DD L%1.dir L%1.exp
	ENDIF

Event 3:

Event Owner:	Stations w/UDP 1 (CRM IV stations)
Event type:	08 – Conversation Outgoing
Subevent:	0
When change to:	OFF
When related to:	All
Action:	IF %op(%2.dir,=,%1.exp)
	IF %gns(%1.exp(2),0)
	$ER U15 U1 U1 U1 N%gns(%1.exp(2),0) U3 %1.ref
	ENDIF
	ENDIF

Event 4:

Event Owner:	Stations w/UDP 1 (CRM IV stations)
Event type:	15 – Event Trigger
Subevent:	1 (NOTE: Subtype 1, NOT 0)
When change to:	ON
When related to:	All
Action:	$GRM N%gns(%2.exp(2),0) NG %2.exp(2) U0
	IND %2.phy %2.dak(I%1.dir) 2 3 OFF
	pause
	IF %gns(%2.exp(2),0)
	$ER U15 U1 U1 U1 N%gns(%2.exp(2),0) U3 %2.ref
	ENDIF