Difference between revisions of "Increased volume on ringing signal"
From Zenitel Wiki
| Line 21: | Line 21: | ||
| − | When | + | When any station starts to ring the volume is set to level 6, and when the ringing stops the volume is set to level 3. |
Revision as of 09:21, 12 August 2008
This article describes how to increase the volume of the private ringing signal, and set it back to normal when the call is answered (or canceled).
As from firmware version AMC 10.23 the volume to a station can be changed by the data command VOL. By using the event type 9 - Private Ringing mode in the Event Handler, one can set a higher volume during the ringing, and set it back to a normal level when the call is answered (i.e. when the Private Ringing mode goes off).
In AlphaPro, Exchange & System > Events, create the event below.
| Event Owner: | Stations with UDP, Id: 8 (all stations) |
| Event type: | 09 - Private Ringing mode |
| When change to: | ON or OFF |
| When related to: | All |
| Action: | $VOL L%1.dir U%chg(6,3) |
When any station starts to ring the volume is set to level 6, and when the ringing stops the volume is set to level 3.