Difference between revisions of "Call Setup Priority"
From Zenitel Wiki
| Line 8: | Line 8: | ||
* '''Alarm:''' Calls will always connect in open mode, also if the called station is busy in another conversation or if there are no more speech channels available. | * '''Alarm:''' Calls will always connect in open mode, also if the called station is busy in another conversation or if there are no more speech channels available. | ||
| − | + | [[File:CallSetupPri.PNG|left|thumb|500px|Call Setup Priority]] | |
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
Revision as of 07:34, 31 July 2015
Call setup priority is used for controlling the setup of outgoing point to point calls. The priority is applicable to station to station calls only, not when calling features (e.g. like group call).
The priority level is set per station from AlphaPro, in the Users & Stations window:
- Low: Calls will always be in private ringing mode, regardless of the private/open settings of the called station
- Normal (default): Calls will connect in private or open mode depending on the private/open settings of the called station
- High: Calls will always be in open mode, regardless of the private/open settings of the called station. Will also override any absence settings on the station.
- Alarm: Calls will always connect in open mode, also if the called station is busy in another conversation or if there are no more speech channels available.
