Revision as of 11:38, 7 May 2009

Release State: Released
Release Version: 4.1.0.0

Upcomming 5.0.0.0

Major changes

Re-written to use the new Stentofon.AlphaCom.AlphaNet.dll library.
Config file name and format is changed with the new library. New config file name: Stentofon.AlphaCom.AlphaNet.OPC.xml
The OPCServerConfigurator application will test for old config file, and prompt for automatic conversion to the new format.
Implemented Redundant OPC Server mode allowing two OPC Devices connect to the same AlphaCom nodes. Requires AlphaCom Sys version 10.54

<br\> Easy Projects Activities

Activity	Short Description
209	Make (IP) station IO items based on ST_STATE messages, make RCO/RCI item obsolete
210	Make global node RCI based on RCI_CHANGED messages incl OPC/RCI config
211	Implemented OPC Items for M-Key, C-Key and DAK-key
217	Updated to use library Stentofon.AlphaCom.AlphaNet.dll
166	Redundant OPC Server

Limitations Global RCI/RCO states is updated on state changes, but is not synchronized at OPC Server startup.

Easy Projects Activities

Activity	Short Description
205	cr_iterate_command items offset
206	OPC AE: "Station UP" is reported on all ST_STATE changes

Added the OPC AE event StationSignal (.signal).
This event is generated from the station sending a Call Request ("I need attention")

First official Release

@@ Line 13: / Line 13: @@
 *Config file name and format is changed with the new library. New config file name: '''Stentofon.AlphaCom.AlphaNet.OPC.xml'''<br/>The [[OPCServerConfigurator]] application will test for old config file, and prompt for automatic conversion to the new format.
 *Implemented Redundant OPC Server mode allowing two OPC Devices connect to the same AlphaCom nodes. Requires AlphaCom Sys version 10.54
+<br\>
 '''Easy Projects Activities'''
@@ Line 36: / Line 36: @@
 | Redundant OPC Server
 |}
+<br/>
+'''Limitations'''
+Global RCI/RCO states is updated on state changes, but is not synchronized at OPC Server startup.
 == Errors Corrected ==