Recall

The Recall function enables live PA and group call broadcast with recall for handling feedback and verifying messages.

The recall function is available as from AMC software version 11, and requires an Audio Messaging license. Default directory numbers for "recall" broadcast:

• 9084: Recall to group 1 (all)
• 9085-9088: Recall to groups 2 - 5

To initiate a group call, dial the directory number of the desired group. Press the M-key to start recording. Release M-key to listen to the message. Press 8 to dispatch the message, or C to cancel.

ReCall user interface

ReCall is a function to record a voice message from the station, and then dispatch the recorded message as a Group Call. The recorded message is a temporary message, which is discarded when the Group Call is finished.

1. Dial access number to group (or 765 + <destination> + M-key)
2. message recording. Choice of (possibly several times):
   • Pres M (* on phone) to record message.
     • If M is pressed again, recording is restarted
   • Release M (# on phone ) Recording stops, message is played back to user
   • C / on-hook to confirm and dispatch message. Return to Idle. Messages shorter than 0.5 seconds are discarded.
   • 8 to confirm and dispatch message, stay active to hear the message being broadcasted
   • 0 delete recording, cancel
   • 7 to hear the message once again

Simplest sequence is then:

1. Dial access number to group
2. M-pres
3. record message
4. M-release
5. C-pres / on-hook to dispatch.