Recall

The Recall function provides delayed groupcall to prevent feedback problems. The recorded message is a temporary message, which is discarded when the Group Call is finished.

Default directory numbers for "recall" broadcast:

• 9084: Recall to group 1 (all)
• 9085-9088: Recall to groups 2 - 5

To initiate a group call, dial the directory number of the desired group. Press the M-key to start recording. Release M-key to listen to the message. Press 8 to dispatch the message, or C to cancel.

ReCall user interface

ReCall is a function to record a voice message from the station, and then dispatch the recorded message as a Group Call. The recorded message is a temporary message, which is discarded when the Group Call is finished.

1. Dial access number to group (or 765 + <destination> + M-key)
2. message recording. Choice of (possibly several times):
   • Pres M (* on phone) to record message.
     • If M is pressed again, recording is restarted
   • Release M (# on phone ) Recording stops, message is played back to user
   • C / on-hook to confirm and dispatch message. Return to Idle. Messages shorter than 0.5 seconds are discarded.
   • 8 to confirm and dispatch message, stay active to hear the message being broadcasted
   • 0 delete recording, cancel
   • 7 to hear the message once again

Simplest sequence is then:

1. Dial access number to group
2. M-pres
3. record message
4. M-release
5. C-pres / on-hook to dispatch.

Hardware and software requiements

Hardware: The recall function can be used on all AMC-IP hardware versions (red or black PCB).

Software: Recall is available from AMC software version 11

License: Recall requires an Audio Messaging license.