1-1a. Exchange startup (solution): Difference between revisions
From Zenitel Wiki
(Created page with "Text... ===Related articles === * Exchange startup (practice) Category: AlphaCom practice") |
|||
| (17 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:EX1-1a.PNG|left|thumb|600px|System configuration]] | |||
<br style="clear:both;" /> | |||
__NOTOC__ | |||
=== | ===Cards=== | ||
* [[ | *Insert the [[ASLT]] card in position 1. | ||
*Insert the [[AMC-IP]] card in position 7. | |||
===Power=== | |||
*Connect the power source to the plug on the back of the exchange, marked '''''24 VAC IN''''' | |||
*Connect the mains cable to the wall outlet | |||
*Observe the exchange starting | |||
===Coldstart=== | |||
*Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | |||
*Press the reset button on the power card briefly | |||
*Keep the cold start button pressed at least 2 sec. after reset | |||
*The AMC status LED will blink green when the system is up and running | |||
===Station connection=== | |||
*Connect the two master stations to physical port number 1 and 2 | |||
*Call the other station by dialling the directory number shown in the display | |||
<br><br><br><br> | |||
---- | |||
===Related articles === | |||
* [[1-1a. Exchange startup (practice)]] | |||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] | ||
Latest revision as of 09:02, 30 June 2022
Cards
Power
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset
- The AMC status LED will blink green when the system is up and running
Station connection
- Connect the two master stations to physical port number 1 and 2
- Call the other station by dialling the directory number shown in the display