Difference between revisions of "Turbine Extended Board Connectors"

Latest revision as of 11:19, 4 June 2021

PCB - Front

P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection

The station can be powered from this port if the line supports Power over Ethernet (PoE).

P3: Secondary Power; 24-48VDC

P4: 10-pin plug-on terminal for external connections

Pin 1 5V

Pin 2 GND

Pin 3 Button Input or LED Driver

Pin 4 Button Input or LED Driver

Pin 5 Button Input or LED Driver

Pin 6 Button Input or LED Driver

Pin 7 Button Input or LED Driver

Pin 8 Button Input or LED Driver

Pin 9 600 ohm balanced line out +

Pin 10 600 ohm balanced line out -

Output ratings: 12mA as LED drivers
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

P5: 6-pin plug-on terminal for external connections

Pin 1 COM relay 1 (Common)

Pin 2 NO relay 1 (Normal Open)

Pin 3 NC relay 1 (Normal Closed)

Pin 4 COM relay 2(Common)

Pin 5 NO relay 2 (Normal Open)

Pin 6 NC relay 2 (Normal Closed)

Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

P6: Loudspeaker & Electret microphone

Pin 1 10W Speaker amplifier +

Pin 2 10W Speaker amplifier -

Pin 3 Electret Microphone +

Pin 4 Electret Microphone -

Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

J2: Turbine Relay Module - TA-10

For details, see Turbine Relay Module - TA-10

J8: Headset/Handset connector

Pin 1: Offhook
Pin 2: GND
Pin 3: PTT
Pin 4: Handset Mic Positive
Pin 5: Handset Mic Negative
Pin 6: Headphone Positive
Pin 7: Headphone Negative
Pin 8: Line In Positive
Pin 9; Line In Negative

Headset/handset speaker (pin 6/7): Minimum 32 Ohms
Microphone input (pin 4/5): For electret type. Bias voltage is 1,25V.
Line In: Maximum input level is 1.228 Vrms (Professional line level).

J9: Keyboard connector

Only available on TKIE-3. See keyboard matrix article for details.

@@ Line 1: / Line 1: @@
-=PCB - Front=
+==PCB - Front==
-[[File:TFIE Connections.PNG|500px]]
+[[File:TKIE Connections2.png|500px]]
 <br style="clear:both;" />
-'''P1&P2''' RJ45 PoE port for 10/100 Mbit Ethernet connection.
+=== P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection ===
 :The station can be powered from this port if the line supports Power over Ethernet (PoE).
@@ Line 10: / Line 10: @@
 <br style="clear:both;" />
-'''P3''' Secondary Power; 24-48VDC
+=== P3: Secondary Power; 24-48VDC ===
-'''P4''' 10-pin plug-on terminal for external connections.
+=== P4: 10-pin plug-on terminal for external connections ===
-[[File:TCIS Connections 6.PNG|thumb|130px|left]]
+[[File:TKIE Connections P4.png|thumb|300px|left]]
-:Pin 1  5.3V
+:Pin 1  5V
 :Pin 2  GND
 :Pin 3  Button Input or LED Driver
@@ Line 28: / Line 28: @@
 <br style="clear:both;" />
-*Output ratings:	12mA as LED drivers
+* Output ratings: 12mA as LED drivers
+* Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
-'''P5''' 6-pin plug-on terminal for external connections.
+===  P5: 6-pin plug-on terminal for external connections ===
-[[File:TFIE Connections 1.PNG|thumb|left|500px]]
+[[File:TKIE Connections P5.png|thumb|left|300px]]
 :Pin 1  COM relay 1 (Common)
 :Pin 2  NO relay 1 (Normal Open)
@@ Line 41: / Line 42: @@
 <br style="clear:both;" />
-*Relay switching capacity: max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
+* Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
-  '''Note!''' In AlphaCom, relay 1 is configured as output 7, and Relay 2 is configured as output 8!
+* Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
-'''P6'''  Loudspeaker & Electret microphone
+===  P6:  Loudspeaker & Electret microphone ===
-[[File:TCIS Connections 7.PNG|thumb|500px|left]]
+[[File:TKIE Connections P6.png|thumb|300px|left]]
 :Pin 1  10W Speaker amplifier +
 :Pin 2  10W Speaker amplifier -
@@ Line 52: / Line 53: @@
 <br style="clear:both;" />
+* Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
-'''J2'''  [[TA-10|Turbine Relay Module - TA-10]]
+=== J2:  Turbine Relay Module - TA-10 ===
+For details, see [[TA-10|Turbine Relay Module - TA-10]]
-'''J8''' Headset/Handset connector
+=== J8: Headset/Handset connector ===
-:Pin 1 Offhook
+*Pin 1: Offhook
-:Pin 2 GND
+*Pin 2: GND
-:Pin 3 PTT
+*Pin 3: PTT
-:Pin 4 Handset Mic Positive
+*Pin 4: Handset Mic Positive
-:Pin 5 Handset Mic Negative
+*Pin 5: Handset Mic Negative
-:Pin 6 Headphone Positive
+*Pin 6: Headphone Positive
-:Pin 7 Headphone Negative
+*Pin 7: Headphone Negative
-:Pin 8 Line In Positive
+*Pin 8: Line In Positive
-:Pin 9 Line In Negative
+*Pin 9; Line In Negative
+* Headset/handset speaker (pin 6/7): Minimum 32 Ohms
+* Microphone input (pin 4/5): For electret type. Bias voltage is 1,25V.
+* Line In: Maximum input level is 1.228 Vrms (Professional line level).
+=== J9: Keyboard connector ===
+Only available on TKIE-3. See [[Keyboard_matrix_-_TKIE-3|keyboard matrix article]] for details.
 [[Category: Turbine Connections]]