TFIX Connections: Difference between revisions

Latest revision as of 14:25, 13 October 2025

This product has been discontinued!

TFIX connections

TFIX version 1 is obsolete. See here for TFIX-V2 Connections.

All connections are made on the main board inside the enclosure of the Turbine Ex station.

Audio connections

The internal microphone, loudspeaker and optional accessories are connected to the 12-screw connection terminal block in the Turbine Ex enclosure.

J13	+	Integrated Mic +
	-	Integrated Mic -
	S	Chassis ground
J6	1	Audio accessory speaker +
	2	Audio accessory speaker -
	3	Audio accessory microphone mic +
J7	4	Audio accessory microphone mic -
	5	Audio accessory Push To Talk (PTT)
	6	Audio accessory Hook
J9	7	Audio accessory Ground PTT/Hook
	8	Loudspeaker +
	9	Loudspeaker -

Flowire connection

Procedures for connecting power supply, LAN network and Inputs/Outputs are described in the manual A100K11499 Ex Turbine Intercoms & Exigo Access Panels Installation & Maintenance Procedures.

@@ Line 1: / Line 1: @@
-[[File:TFIX Connections 2.PNG|thumb|right|TFIX audio connections]]
+{{obsolete}}
+[[File:TFIX Connections 2.PNG|thumb|500px|right|TFIX connections]]
-All electrical connections are made on the main board inside the housing.
+TFIX version 1 is obsolete. See here for [[TFIX-V2 Connections]].
-[[File:TFIX Connections 1.PNG|thumb|right|500px]]
+All connections are made on the main board inside the enclosure of the Turbine Ex station.
+===Audio connections===
+The internal microphone, loudspeaker and optional accessories are connected to the 12-screw connection terminal block in the Turbine Ex enclosure.
-===Connection of audio accessories===
-The blue connector is marked +, -, S, and numbers 1 to 9. These should be utilized as follows:
 {| class="wikitable"
 |-
@@ Line 56: / Line 58: @@
 ===Flowire connection===
-Each Ex Product features two [[FCDC-2|Flowire]] connectors. Power and signal redundancy can be achieved by utilizing both Flowire connectors in an A-B system configuration.
+Procedures for connecting power supply, LAN network and Inputs/Outputs are described in the
- Do not connect more than 9 Ex Products to each central Flowire Converter.
+manual A100K11499 Ex Turbine Intercoms & Exigo Access Panels Installation & Maintenance
+Procedures.
- Only use one of the Flowire connectors on each Ex product for each central Flowire Converter.
- Load sharing power supply must be used for redundant cabling solutions.
-[[File:TFIX Connections 3.PNG|left|400px]]
-<br style="clear:both;" />
- '''The main board receives both power and Ethernet signals through two wires. You can connect either'''
- '''A or B for connection to the rest of the system, or both A and B, each to a separate server,'''
- '''in order to achieve redundancy.'''
-See "[[Turbine EX Connectors]]" for more details.
 [[Category: Turbine Connections]]

TFIX Connections: Difference between revisions

From Zenitel Wiki

Latest revision as of 14:25, 13 October 2025

Audio connections

Flowire connection