Actions

IP Desktop Station LED Indications: Difference between revisions

From Zenitel Wiki

No edit summary
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
====Station LED====
====Station LED====
LED4 - Red 5mm LED on board rear side, also seen through front plate.
LED4 - Red 5mm LED on board rear side, also seen through front plate.
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]]
[[File:IPDeskLED.png|left|thumb|200px|Station LED]]
<br style="clear:both;" />
<br style="clear:both;" />
<u>'''Blinking at 1 second intervals:'''</u>
'''Blinking at 1 second intervals:'''<br/>
Station cannot register to the server/controller


*Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
* Invalid network settings (IP address and network mask) in the device
* Wrong or missing account settings (Server IP, directory number, password..)
* Failing to register due to missing license in the server
* The server is offline
* Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
If the server is on a different subnet, check that
* A valid Default gateway is defined


Possible reasons:
'''No blinking:'''
:*No connection to Ethernet
:*Wrong AlphaCom IP address configured
:*Invalid IP address
:*No gateway or wrong gateway to the AlphaCom XE Audio Server


<u>'''Blinking at 5 second intervals:'''</u> <br/>
Possible reasons:  
*Station connected but NOT registered in the AlphaCom XE Audio Server.
* Station connected and registered to the ICX-AlphaCom
* Station not powered up (if no other LEDs are active)


Reason:
:*Station has not been programmed in AlphaPro
:*Missing IP Station license in AlphaCom XE Audio Server


<u>'''No blinking:'''</u>
'''Blinking at 5 second intervals:'''<br/>
{{Note| This LED behaviour only applies to INCA Desktop stations [[IP Desktop Master Station - 1008000000|1008000000]] and [[IP OR Master Station - 1008015000|1008015000]] in ICX-AlphaCom mode}}
Station connected but NOT registered in the ICX-AlphaCom


Possible reasons:  
Possible reasons:  
:*Station connected and registered to the AlphaCom XE Audio Server
* Station has not been programmed in AlphaPro
:*Station not powered up (if no other LEDs are active)
* Missing IP Station license in the ICX-AlphaCom


[[Category:INCA Indication LEDs]]
[[Category:Station Indication LEDs]]

Latest revision as of 11:10, 20 November 2020

Station LED

LED4 - Red 5mm LED on board rear side, also seen through front plate.

Station LED


Blinking at 1 second intervals:
Station cannot register to the server/controller

Possible reasons:

  • Invalid network settings (IP address and network mask) in the device
  • Wrong or missing account settings (Server IP, directory number, password..)
  • Failing to register due to missing license in the server
  • The server is offline
  • Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)

If the server is on a different subnet, check that

  • A valid Default gateway is defined

No blinking:

Possible reasons:

  • Station connected and registered to the ICX-AlphaCom
  • Station not powered up (if no other LEDs are active)


Blinking at 5 second intervals:

Note icon This LED behaviour only applies to INCA Desktop stations 1008000000 and 1008015000 in ICX-AlphaCom mode


Station connected but NOT registered in the ICX-AlphaCom

Possible reasons:

  • Station has not been programmed in AlphaPro
  • Missing IP Station license in the ICX-AlphaCom
Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP_Desktop_Station_LED_Indications&oldid=221785"
MediaWiki spam blocked by CleanTalk.