Actions

Difference between revisions of "IP Flush Master DAK-48 Module"

From Zenitel Wiki
 
(21 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
{{A}}
+
{{AI}} [[File:D48-newZ.png|thumb|400px|DAK-48 Unit. Item number: 1008010100]]
−
[[File:1008010100.PNG|thumb|200px|DAK-48 Unit. Item number: 1008010100]]
+
The '''IP DAK-48 unit''' expands the:
−
===<u>Highlights</u>===
+
* [[IP Flush Master -V2]]
−
*Extends IP Flush Master Station with 48 programmable DAK keys (direct access keys)
+
* [[IP Flush Master - 1008031000|INCA IP Flush Master Station]]
−
*Ideal for control room applications
+
with an additional 48 Direct Access Keys. Up to two DAK-48 units can be connected to one station.
−
*Visual indications with two LEDs (green/red) per DAK key
 
−
*All keys have backlight (adjustable)
 
−
*Easy labeling of keys
 
  
−
===<u>Software requirements</u>===
+
==Software and license requirements==
−
* IP Flush Master: Version 01.09.3.0 or later
+
'''Software:'''
 +
* IP Flush Master (INCA): Version 01.09.3.0 or later
 +
* IP Flush Master (Turbine): Version 6.0.3.0 or later
 
* AMC-IP: Version 10.60.3.0 or later
 
* AMC-IP: Version 10.60.3.0 or later
  
−
===<u>Installing the DAK-48 Expansion module</u>===
+
'''License:'''
−
The IP DAK-48 unit expands the IP Flush Master station with an additional 48 Direct Access Keys. Up to two DAK-48 units can be connected to one station.
+
To enable the use of the DAK48 module a license is required:
 +
* 1009648001: [[Licenses#CRM-V_DAK_expansion|License for CRM-V DAK expansion]]
  
 +
Regardless if the CRM-V station is using one or two DAK48 modules, only one CRM-V DAK expansion license is required.
 +
{{note|The DAK-48 module is supported in '''ICX-AlphaCom mode''' only, not in Edge, Pulse or SIP mode.}}
 +
 +
== Installing the DAK-48 Expansion module ==
 
To interconnect the DAK-48 unit to the main unit, use the cable which is coming with the DAK-48 unit. The DAK-48 unit receive its power and data via this cable.
 
To interconnect the DAK-48 unit to the main unit, use the cable which is coming with the DAK-48 unit. The DAK-48 unit receive its power and data via this cable.
  
−
'''WARNING:''' A standard patch cable (1:1) must not be used. It might damage the unit!
+
{{obs| A standard patch cable (1:1) must not be used. It might damage the unit!}}
  
 
Installing the IP DAK-48 Unit:
 
Installing the IP DAK-48 Unit:
Line 27: Line 31:
 
[[File:IP_Master_DAK-48_Unit_Installation.PNG]]
 
[[File:IP_Master_DAK-48_Unit_Installation.PNG]]
  
−
Installing the IP DAK-48 Unit
+
 
−
To add another DAK unit, plug one end of an RJ45-RJ45 cable into the RJ45 port of  
+
To add a second DAK unit, plug one end of an RJ45-RJ45 cable into the RJ45 port of the installed unit and plug the other end into the RJ45 port of the new unit.
−
the installed unit and plug the other end into the RJ45 port of the new unit.
 
 
<br style="clear:both;" />
 
<br style="clear:both;" />
  
−
===<u>[[DAK-48 Module Dimensions & Mounting Instructions|Dimensions]]</u>===
+
==Related articles==
−
 
+
* [[DAK-48 Module Dimensions & Mounting Instructions|Dimensions]]
−
===<u>[http://www.zenitel.com/product/crm-v-dak48 Additional Documentation on Zenitel.com]</u>===
+
* [[Back box on wall mount - 1008098600]]
−
 
 
−
===<u>Related articles</u>===
 
−
* [[IP Flush Master - 1008031000]]
 
 
* [[Back box flush mount - 1008098700]]
 
* [[Back box flush mount - 1008098700]]
−
* [[Licenses#CRM-V_DAK_expansion|DAK expansion license]]
+
* [[Licenses#CRM-V_DAK_expansion|AlphaCom DAK expansion license 1009648001]]
 +
* [[Licenses for ICX-500 and ICX-AlphaCom Core]]
 +
* [http://www.zenitel.com/product/crm-v-dak48 Additional Documentation on Zenitel.com]
  
−
===<u>Related products</u>===
+
==Related products ==
−
* Label Paper for IP DAK-48 Unit - 1008010101 (20 sheets)
+
* Label Paper for IP DAK-48 Unit - 1008010101 (1 sheet)
−
* License 1009648001 to extend the IP Flush Master with the IP DAK-48 Unit
 
  
  
 
[[Category: INCA Backboxes and accessories]]
 
[[Category: INCA Backboxes and accessories]]
 +
[[Category: Turbine Backboxes and accessories]]

Latest revision as of 14:16, 29 January 2024

AI.png
DAK-48 Unit. Item number: 1008010100

The IP DAK-48 unit expands the:

with an additional 48 Direct Access Keys. Up to two DAK-48 units can be connected to one station.

Software and license requirements

Software:

  • IP Flush Master (INCA): Version 01.09.3.0 or later
  • IP Flush Master (Turbine): Version 6.0.3.0 or later
  • AMC-IP: Version 10.60.3.0 or later

License: To enable the use of the DAK48 module a license is required:

Regardless if the CRM-V station is using one or two DAK48 modules, only one CRM-V DAK expansion license is required.

Note icon The DAK-48 module is supported in ICX-AlphaCom mode only, not in Edge, Pulse or SIP mode.


Installing the DAK-48 Expansion module

To interconnect the DAK-48 unit to the main unit, use the cable which is coming with the DAK-48 unit. The DAK-48 unit receive its power and data via this cable.

OBS icon A standard patch cable (1:1) must not be used. It might damage the unit!


Installing the IP DAK-48 Unit:

  • Power off the IP Flush Master station by disconnecting the ethernet cable in the LAN port
  • Plug one end of the cable coming with the DAK-48 unit into the RJ45 port on the right hand side of the IP Flush Master station (when the station is viewed from the front).
  • Plug the other end of the cable into the left RJ45 port on the DAK-48 unit (when the unit is viewed from the front).
  • Power up the IP Flush Master station by connecting the ethernet cable to the LAN port

IP Master DAK-48 Unit Installation.PNG


To add a second DAK unit, plug one end of an RJ45-RJ45 cable into the RJ45 port of the installed unit and plug the other end into the RJ45 port of the new unit.

Related articles

Related products

  • Label Paper for IP DAK-48 Unit - 1008010101 (1 sheet)
Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP_Flush_Master_DAK-48_Module&oldid=235686"