Actions

Difference between revisions of "INCA Station Restore Factory Defaults"

From Zenitel Wiki

(Created page with "An IP Station may have to be reset to its original factory default settings if, for instance, the password to the webserver is forgotten. The defaults can be either be set to...")
 
 
(54 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
An IP Station may have to be reset to its original factory default settings if, for instance, the password to the webserver is forgotten.
+
{{APS}}
 +
== Applicable for stations ==
 +
* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
 +
* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]]
 +
<div style="text-align:left;"> <youtube width="300" height="180">W_YbTuXvr1w</youtube>  </div>
 +
<br>
 +
<div style="text-align:left;"> <youtube width="300" height="180">bJhq8uyTP24</youtube>  </div>
  
−
The defaults can be either be set to Static IP or Activated DHCP (when there are many new IP Substations in an installation).
 
  
−
== Restore to Factory Default for IP Stations without Display ==
+
==Procedure ==
−
This procedure is the recommended procedure for all IP Stations without Display:
+
When loading factory defalt settings, the unit can be set to use either '''Static IP''' or '''DHCP'''.  
−
* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
+
[[File:Load Defaults without Display - 1.PNG|thumb|right|200px]]
−
* IP Substation Kit - [[IP Substation Kit - 1008090200|1008090200]]
 
−
* [[IP Master Station Kit - 1008093000]] if ''no'' Display is connected.
 
−
* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]]
 
−
<br/>
 
−
The procedure ''can'' also be applied to:
 
−
* The [[IP Substation Kit - 1008090200]] if a button is connected to Input 1.
 
−
* The IP Dual Display - [[IP Dual Display Station - 1008007000|1008007000]] by using the Privacy button. (In the procedure below, use the Privacy button when the procedure says "Call button").
 
−
<br/>
 
−
The Factory Default procedure can be used to either set the station to use a Static IP address, or to use IP address from a DHCP server.
 
−
=== Restore with Static IP ===
 
−
[[File:Load Defaults without Display - 1.PNG|right|300px]]
 
−
# While pressing the call button, power up the substation.
 
−
# When the substation LED starts blinking, release the call button '''after exactly 2 blinks'''.
 
−
# Let the LED blink for '''exactly 2 more times''', then press the button again.
 
−
# Keep the button pressed until the LED '''blinks fast 2 times''' indicating a successful reset with static IP.
 
−
# Release the button and the substation will restart with the factory default settings.
 
  
−
<u>'''Factory default values:'''</u>
+
[[File:Load Defaults without Display - 2.PNG|right|thumb|200px]]
−
* Station IP address: '''169.254.1.100'''
+
# While pressing the call button, power up the station and keep the button pressed.
−
* AlphaCom IP address: '''169.254.1.5'''
+
# Release the button '''after exactly 2 flashes''' of the LED.
−
* Username: '''admin''' (Software 01.06 and earlier: '''ADMIN''')
+
# Let the LED flash for '''exactly 2 more times''' (Static IP) or '''exactly 4 more times''' (DHCP), then press the button again.
−
* Password: '''alphaadmin''' (Software 01.06 and earlier: '''alphacom''')
+
# Keep the button pressed until the LED '''flashes fast 2 time'''s (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset.
 +
# Release the button and the station will restart with the factory default settings.
 +
<br>
  
−
=== Restore with Activated DHCP ===
+
== Factory default values ==
−
[[File:Load Defaults without Display - 2.PNG|right|300px]]
+
*Station Mode: '''Pulse'''
−
The DHCP option is available from software version 01.07.<br/>
+
*Station IP address: '''169.254.1.100''' (Static) or '''DHCP'''
−
* While pressing the call button, power up the substation.
+
*Username: '''admin'''
−
* When the substation LED starts blinking, release the call button '''after exactly 2 blinks'''.
+
*Password: '''alphaadmin'''
−
* Let the LED blink for '''exactly 4 more times''', then press the button again.
 
−
* Keep the button pressed until the LED '''blinks fast 4 times''' indicating a successful reset with activated DHCP.
 
−
* Release the button and the substation will restart with the factory default settings.
 
−
<br/>
 
−
'''Factory default values:'''
 
−
* Station IP address: (determined by DHCP server)
 
−
* AlphaCom IP address: '''169.254.1.5'''
 
−
* Username: '''admin''' (Software 01.06 and earlier: '''ADMIN''')
 
−
* Password: '''alphaadmin''' (Software 01.06 and earlier: '''alphacom''')
 
−
<br/>
 
  
−
== Restore to Factory Default for IP Stations without Display and Key ==
 
−
* IP Speaker - [[IP Ceiling Loudspeaker - 1401002100|1401002100]]/[[IP Horn Loudspeaker - 1401002500|1401002500]]
 
−
* IP Heavy Duty - [[IP Heavy Duty Station - 1008072200|1008072200]]
 
−
* IP Substation Kit - [[IP Substation Kit - 1008090200|1008090200]]
 
−
The procedure can be used on the IP Substation Kit - 1008090200 an on the IP Master Station Kit - 1008093000.
 
−
<br/>
 
−
The Factory Default can be either set to Static IP 169.254.1.100 or activate DHCP.<br/>
 
−
[[File:Load Defaults without KEY.PNG|left]]
 
−
* Connect a push button ('''KEY1''') between pin 1 and 4 on the P4 connector.
 
−
* Press the button, and power up the substation
 
−
* Keep the button pressed. Release the call button after exactly 2 blinks of the LED
 
−
* Let the LED blink for exactly 2 (Static IP) or 4 times (DHCP), then press the button again
 
−
* Keep the button pressed until it confirms successful factory reset by 2 (Static IP) or 4 (DHCP) fast blinks of the LED
 
  
  
 +
{{note| Software 01.06 and earlier: Username/password is '''ADMIN/alphacom''' }}
  
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]
 
[[Category: INCA - Restore Factory Defaults and Software Upgrade]]

Latest revision as of 13:16, 15 May 2018

APS.png

Applicable for stations



Procedure

When loading factory defalt settings, the unit can be set to use either Static IP or DHCP.

Load Defaults without Display - 1.PNG
Load Defaults without Display - 2.PNG
  1. While pressing the call button, power up the station and keep the button pressed.
  2. Release the button after exactly 2 flashes of the LED.
  3. Let the LED flash for exactly 2 more times (Static IP) or exactly 4 more times (DHCP), then press the button again.
  4. Keep the button pressed until the LED flashes fast 2 times (Static IP) or flashes fast 4 times (DHCP) indicating a successful reset.
  5. Release the button and the station will restart with the factory default settings.


Factory default values

  • Station Mode: Pulse
  • Station IP address: 169.254.1.100 (Static) or DHCP
  • Username: admin
  • Password: alphaadmin


Note icon Software 01.06 and earlier: Username/password is ADMIN/alphacom


Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_Station_Restore_Factory_Defaults&oldid=185977"