Difference between revisions of "INCA IP DualDisplay Station - Restore Factory Defaults"
From Zenitel Wiki
(→By a power boot sequence) |
|||
(11 intermediate revisions by 3 users not shown) | |||
Line 3: | Line 3: | ||
* By a power boot sequence | * By a power boot sequence | ||
− | == | + | <div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube> </div> |
+ | |||
+ | ==Load factory defaults via the display menu== | ||
The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server. | The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server. | ||
+ | |||
* Press the '''Setup''' button beneath the display | * Press the '''Setup''' button beneath the display | ||
* Enter the password '''1851''' and press the '''Ok''' button. | * Enter the password '''1851''' and press the '''Ok''' button. | ||
Line 14: | Line 17: | ||
|[[Image:Load Defaults in IP Display Station - 2.PNG|thumb|260px]] | |[[Image:Load Defaults in IP Display Station - 2.PNG|thumb|260px]] | ||
|} | |} | ||
+ | * The station will now restart with factory settings | ||
− | + | == Factory default values == | |
− | |||
− | == | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
*Station Mode: '''Pulse''' | *Station Mode: '''Pulse''' | ||
*Station IP address: '''169.254.1.100''' | *Station IP address: '''169.254.1.100''' | ||
Line 34: | Line 25: | ||
*Password: '''alphaadmin''' | *Password: '''alphaadmin''' | ||
− | == | + | == Load factory defaults via power boot sequence == |
− | + | [[File:DualDisplay Privacy.png|thumb|300px|right|Location of the Privacy button]] | |
− | # | + | The unit can be set to use either '''Static IP''' or '''DHCP'''. Pay attention to the station LED during the restore procedure: |
− | # Let the LED | + | |
− | # Keep the button pressed until the LED ''' | + | # While pressing the '''Privacy''' button, power up the station kit and keep the button pressed. |
+ | # Release the button '''after exactly 2 flashes''' of the LED. | ||
+ | # Let the LED flash for '''exactly 2 more times''' (Static IP) or '''exactly 4 more times''' (DHCP), then press the button again. | ||
+ | # Keep the button pressed until the LED '''flashes fast 2 times''' (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset. | ||
# Release the button and the station will restart with the factory default settings. | # Release the button and the station will restart with the factory default settings. | ||
+ | |||
Factory default values: | Factory default values: | ||
*Station Mode: '''Pulse''' | *Station Mode: '''Pulse''' | ||
− | *Station IP address: ''' | + | *Station IP address: '''169.254.1.100''' or '''DHCP''' |
*Username: '''admin''' | *Username: '''admin''' | ||
*Password: '''alphaadmin''' | *Password: '''alphaadmin''' | ||
− | |||
[[Category: INCA - Restore Factory Defaults and Software Upgrade]] | [[Category: INCA - Restore Factory Defaults and Software Upgrade]] |
Latest revision as of 14:23, 15 May 2018
The IP DualDisplay station can be reset to Factory Default settings in two ways:
- From the display menu
- By a power boot sequence
The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.
- Press the Setup button beneath the display
- Enter the password 1851 and press the Ok button.
- Navigate to Load defaults and press the Sel button.
- Press the Sel button to load factory defaults.
- The station will now restart with factory settings
Factory default values
- Station Mode: Pulse
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin
Load factory defaults via power boot sequence
The unit can be set to use either Static IP or DHCP. Pay attention to the station LED during the restore procedure:
- While pressing the Privacy button, power up the station kit and keep the button pressed.
- Release the button after exactly 2 flashes of the LED.
- Let the LED flash for exactly 2 more times (Static IP) or exactly 4 more times (DHCP), then press the button again.
- Keep the button pressed until the LED flashes fast 2 times (Static IP) or flashes fast 4 times (DHCP) indicating a successful reset.
- Release the button and the station will restart with the factory default settings.
Factory default values:
- Station Mode: Pulse
- Station IP address: 169.254.1.100 or DHCP
- Username: admin
- Password: alphaadmin