Difference between revisions of "Door Opening feature (Edge)"
From Zenitel Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 12: | Line 12: | ||
| − | If there is a need to restrict which stations should be allowed to do Door Opening, this can be configured via [[ | + | If there is a need to restrict which stations should be allowed to do Door Opening, this can be configured via [[Device Profiles]]. |
For Door Opening it is also possible to use operate the relay on a remote device. See [[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Operating the relay of a Remote Device]] for more information. | For Door Opening it is also possible to use operate the relay on a remote device. See [[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Operating the relay of a Remote Device]] for more information. | ||
Latest revision as of 11:34, 16 September 2019
During conversation with the Door Intercom Station, the integrated relay of the door station can be operated by pressing digit "6" on the master station. As the Door Stations by default are configured to trigger on DTMF "6", no special configuration is required for the Door Opening feature.
One can change which digit to use, or the pulse time of the relay, from the web interface of the door intercom station:
- Log on to the Door Station
- Select SIP Configuration > Relay/Outputs.
If there is a need to restrict which stations should be allowed to do Door Opening, this can be configured via Device Profiles.
For Door Opening it is also possible to use operate the relay on a remote device. See Operating the relay of a Remote Device for more information.