Difference between revisions of "Turbine Extended Board Connectors"

Latest revision as of 11:19, 4 June 2021

PCB - Front

P1 & P2: RJ45 PoE port for 10/100 Mbit Ethernet connection

The station can be powered from this port if the line supports Power over Ethernet (PoE).

P3: Secondary Power; 24-48VDC

P4: 10-pin plug-on terminal for external connections

Pin 1 5V

Pin 2 GND

Pin 3 Button Input or LED Driver

Pin 4 Button Input or LED Driver

Pin 5 Button Input or LED Driver

Pin 6 Button Input or LED Driver

Pin 7 Button Input or LED Driver

Pin 8 Button Input or LED Driver

Pin 9 600 ohm balanced line out +

Pin 10 600 ohm balanced line out -

Output ratings: 12mA as LED drivers
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

P5: 6-pin plug-on terminal for external connections

Pin 1 COM relay 1 (Common)

Pin 2 NO relay 1 (Normal Open)

Pin 3 NC relay 1 (Normal Closed)

Pin 4 COM relay 2(Common)

Pin 5 NO relay 2 (Normal Open)

Pin 6 NC relay 2 (Normal Closed)

Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

P6: Loudspeaker & Electret microphone

Pin 1 10W Speaker amplifier +

Pin 2 10W Speaker amplifier -

Pin 3 Electret Microphone +

Pin 4 Electret Microphone -

Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².

J2: Turbine Relay Module - TA-10

For details, see Turbine Relay Module - TA-10

J8: Headset/Handset connector

Pin 1: Offhook
Pin 2: GND
Pin 3: PTT
Pin 4: Handset Mic Positive
Pin 5: Handset Mic Negative
Pin 6: Headphone Positive
Pin 7: Headphone Negative
Pin 8: Line In Positive
Pin 9; Line In Negative

Headset/handset speaker (pin 6/7): Minimum 32 Ohms
Microphone input (pin 4/5): For electret type. Bias voltage is 1,25V.
Line In: Maximum input level is 1.228 Vrms (Professional line level).

J9: Keyboard connector

Only available on TKIE-3. See keyboard matrix article for details.

@@ Line 13: / Line 13: @@
 === P4: 10-pin plug-on terminal for external connections ===
-[[File:TKIE Connections P4.png|thumb|130px|left]]
+[[File:TKIE Connections P4.png|thumb|300px|left]]
 :Pin 1  5V
@@ Line 32: / Line 32: @@
 ===  P5: 6-pin plug-on terminal for external connections ===
-[[File:TKIE Connections P5.png|thumb|left|500px]]
+[[File:TKIE Connections P5.png|thumb|left|300px]]
 :Pin 1  COM relay 1 (Common)
 :Pin 2  NO relay 1 (Normal Open)
@@ Line 46: / Line 46: @@
 ===  P6:  Loudspeaker & Electret microphone ===
-[[File:TCIS Connections 7.PNG|thumb|500px|left]]
+[[File:TKIE Connections P6.png|thumb|300px|left]]
 :Pin 1  10W Speaker amplifier +
 :Pin 2  10W Speaker amplifier -