ZMK-1 Restore Factory Defaults: Difference between revisions
From Zenitel Wiki
Lennert.werf (talk | contribs) (Created page with "A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can e...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP. | ||
Factory default settings can be [[Restore Factory Defaults - From the device web interface|restored from the web interface]], or by a hardware reset as explained below. | |||
<div style="text-align:left;"> <youtube width="300" height="180">HD2ysF8Fpio</youtube> </div> | <div style="text-align:left;"> <youtube width="300" height="180">HD2ysF8Fpio</youtube> </div> | ||
| Line 24: | Line 26: | ||
==Reset to Factory Default Settings with Static IP== | ==Reset to Factory Default Settings with Static IP== | ||
To reset: | To reset: | ||
# While pressing the button, power up the station by connecting to a PoE switch | # While pressing the button, power up the station by connecting to a PoE switch | ||
# Hold the button until the station audio starts counting, and release the button on '''count 1''' | # Hold the button until the station audio starts counting, and release the button on '''count 1''' | ||
Latest revision as of 12:37, 15 January 2025
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Factory default settings can be restored from the web interface, or by a hardware reset as explained below.
Preparation
- Connect a speaker to the speaker output
- Connect a button to input 1
Reset to Factory Default Settings with Activated DHCP
To reset:
- While pressing the button, power up the station by connecting to a PoE switch
- Hold the button until the station audio starts counting, and release the button on count 1
- Press and hold the button on count 5 and release on count 0
- If there is no 0 count, the procedure has failed and you have to start again
- Press the button, and the station will speak its IP address
Factory default values
- Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- While pressing the button, power up the station by connecting to a PoE switch
- Hold the button until the station audio starts counting, and release the button on count 1
- Press and hold the button on count 3 and release on count 0
- If there is no 0 count, the procedure has failed and you have to start again
- Press the call button, and the station will speak its IP address
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin