Difference between revisions of "Uploading HTTPS certificate"
From Zenitel Wiki
(→Version 9 and later) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | This article describes how to upload a SSL certificate to a Zenitel device for use with HTTPS. | |
| − | This article describes how to upload a SSL certificate to | ||
__TOC__ | __TOC__ | ||
==Version 9 and later== | ==Version 9 and later== | ||
| Line 42: | Line 41: | ||
==Version 8 and earlier== | ==Version 8 and earlier== | ||
| − | {{note| | + | {{note|Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]].}} |
*Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certificates are listed. | *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certificates are listed. | ||
Latest revision as of 08:07, 25 October 2024
This article describes how to upload a SSL certificate to a Zenitel device for use with HTTPS.
Version 9 and later
|
Enable Advanced Configuration Mode. |
- Select Advanced Network and from the left hand menu select HTTPS Certificates. The current self-signed HTTPS certificate is listed.
- First, generate a Certificate Signing Request (CSR). Enter the required data in each field and click Generate.
 |
| Enter the required information and click Generate |
- Download the CSR
 |
| Download the CSR |
- Get a SSL certificate from a certified Certificate Authority (CA) using the generated CSR
- The name of the SSL certificate must be changed to end with _https.pem.
- If there are multiple certificates the last one will always be used.
- Click on Choose Certficate and browse to the location of the SSL certificate. When selected click on the Upload button
 |
| Upload the SSL Certificate |
Version 8 and earlier
|
|
Enable Advanced Configuration Mode. |
- Select Edge Configuration/SIP Configuration and from the left hand menu select Certificates. The Turbine certificates are listed.
- First, generate a Certificate Signing Request (CSR). Enter the required data in each field and click Generate.
 |
| Enter the required information and click Generate |
- Download the CSR
 |
| Download the CSR |
- Get a SSL certificate from a certified Certificate Authority (CA) using the generated CSR
- The name of the SSL certificate must be changed to end with _https.pem.
- If there are multiple certificates the last one will always be used.
- Click on Choose file and browse to the location of the SSL certificate. When selected click on the Upload button
 |
| Uploaded the SSL Certificate |