Actions

Difference between revisions of "STATUS REPORT"

From Zenitel Wiki

(New page: {| border="1" align=left |- !style="background:#ffdead;" width="90pt" colspan="2"|STATUS_REPORT !style="background:#ffdead;" width="100pt"|0x0072 !style="background:#ffdead;" width="30pt"...)
 
 
(14 intermediate revisions by 10 users not shown)
Line 1: Line 1:
−
{| border="1" align=left
+
{{AI}}
 +
{| border="1"
 
|-
 
|-
 
!style="background:#ffdead;" width="90pt" colspan="2"|STATUS_REPORT
 
!style="background:#ffdead;" width="90pt" colspan="2"|STATUS_REPORT
 
!style="background:#ffdead;" width="100pt"|0x0072
 
!style="background:#ffdead;" width="100pt"|0x0072
 
!style="background:#ffdead;" width="30pt"|114
 
!style="background:#ffdead;" width="30pt"|114
−
!style="background:#ffdead;" width="100pt"|AMC 07.30
+
!style="background:#ffdead;" |AMC 07.30
 
|-
 
|-
 
|colspan="5"|Report equipment Presence and Error/OK status for Subscriber Lines, Audio Links, Devices, Boards, etc.  Intended for remote logging and external monitoring systems.
 
|colspan="5"|Report equipment Presence and Error/OK status for Subscriber Lines, Audio Links, Devices, Boards, etc.  Intended for remote logging and external monitoring systems.
 
As the message is very general, the message definition will be followed by a detailed example of how the different parameters are used for each “entity” type.  Unused parameters/flags are always set to 0.
 
As the message is very general, the message definition will be followed by a detailed example of how the different parameters are used for each “entity” type.  Unused parameters/flags are always set to 0.
 +
 +
AlphaCom can be programmed to forward STATUS_REPORT messages to two addresses. See [[Exchange_%26_System_(AlphaPro)#Logs_and_Errors]], "System Log and Error Reports to".
 
|-
 
|-
−
|align=center|1||[[NET_OBJ_REF]]<br\> {[[ECL_STATION]],<br\> [[ECL_AUDIO_RING]],<br\> [[ECL_AUDIO_LINK]],<br\> [[ECL_BOARD]],<br\> [[ECL_DEVICE]],<br\> [[ECL_NODE]]}||colspan="3"|Entity Reference to the Station / Inter­Exchange Link / [[ICC]] Audio Ring / Board / Device / Exchange the status message is for.<br\>The entity number is a logical number, e.g. station from 1 to 552.
+
|align=center|1||[[NET_OBJ_REF]]<br /> {[[ECL_STATION]],<br /> [[ECL_AUDIO_RING]],<br /> [[ECL_AUDIO_LINK]],<br /> [[ECL_BOARD]],<br /> [[ECL_DEVICE]],<br /> [[ECL_NODE]]}||colspan="3"|Entity Reference to the Station / Inter­Exchange Link / [[ICC Protocol|ICC]] Audio Ring / Board / Device / Exchange the status message is for.<br />The entity number is a logical number, e.g. station from 1 to 552.
 
|-
 
|-
−
|align=center|2||[[NET_OBJ_REF]]<br\> {[[NRF_PHYS_ADDR]]}||colspan="3"|Physical address for the entity defined in parameter 1.<br\>This is a hardware module/board/port type of information.
+
|align=center|2||[[NET_OBJ_REF]]<br /> {[[NRF_PHYS_ADDR]]}||colspan="3"|Physical address for the entity defined in parameter 1.<br />This is a hardware module/board/port type of information.
 
|-
 
|-
−
|align=center|3||[[BITMAP]][1..8]||(Error) State Flags.<br\>Bit 1 = Interface present:<br\>Bit 2 = Interface test:<br\>Bit 4 = Signaling test:<br>Bit 6 = Audio test:<br\>Bit 7 = Device dependent test||colspan="2"|&nbsp;<br\>Board present in exchange<br\>Board reports entity missing/down<br\>Last signaling test failed<br\>Last audio (tone) test failed<br\>&nbsp;
+
|align=center|3||[[BITMAP]][1..8]||(Error) State Flags.<br />Bit 1 = Interface present:<br />Bit 2 = Interface test:<br />Bit 4 = Signaling test:<br>Bit 6 = Audio test:<br />Bit 7 = Device dependent test||colspan="2"|&nbsp;<br />Board present in exchange<br />Board reports entity missing/down<br />Last signaling test failed<br />Last audio (tone) test failed<br />&nbsp;
 
|-
 
|-
−
|align=center|4||[[BITMAP]][1..8]||colspan="3"|(State) Change Flags.<br\>Each bit is set if the corresponding state flag bit was changed from the previous report and cleared if it was unchanged.
+
|align=center|4||[[BITMAP]][1..8]||colspan="3"|(State) Change Flags.<br />Each bit is set if the corresponding state flag bit was changed from the previous report and cleared if it was unchanged.
 
|-
 
|-
−
|align=center|5||[[BITMAP]][1..8]||colspan="3"|Reporting Flags.<br\>Bit 8 = [[VERBOSE]].  The report is from a manually/externally started test, where the user wants a complete report.  
+
|align=center|5||[[BITMAP]][1..8]||colspan="3"|Reporting Flags.<br />Bit 8 = VERBOSE.  The report is from a manually/externally started test, where the user wants a complete report.  
 
|-
 
|-
 
|align=center|6||[[UINT1]]||colspan="3"|Extra (Error) Status Information 1.
 
|align=center|6||[[UINT1]]||colspan="3"|Extra (Error) Status Information 1.
Line 23: Line 26:
 
|align=center|7||[[UINT1]]||colspan="3"|Extra (Error) Status Information 2.
 
|align=center|7||[[UINT1]]||colspan="3"|Extra (Error) Status Information 2.
 
|-
 
|-
−
|align=center|8||[[NET_OBJ_REF]]<br\>(optional)||colspan="3"|Entity Information field 1.<br\>.
+
|align=center|8||[[NET_OBJ_REF]]<br />(optional)||colspan="3"|Entity Information field 1.<br />.
 +
|-
 +
|colspan="5"|'''STATUS_REPORT for Stations:'''
 +
|-
 +
|align=center|1||[[NET_OBJ_REF]]||colspan="3"|Station from 1 to 552.<br />The Sub Class field specifies the type of station interface (TouchLine, Telephone).<br />Status info. can have different meaning for each Sub Class.
 +
|-
 +
|align=center|2||[[NET_OBJ_REF]]||colspan="3"|Physical address:  Module/board/port.<br />The (Implicit Type) Resource Address format is used
 +
|-
 +
|align=center|3||[[BITMAP]][1..8]||(Error) State Flags.<br />Bit 1 = Interface present:<br />Bit 2 = Interface test:<br />Bit 6 = Audio test:<br />Bit 7 = Device dep. test:||---What is reported for Stations:---<br />[[ASLT]]/[[ATLB]] board missing <br />[[ASLT]]/[[ATLB]] wire monitoring<br />Tone Test <br />Handset Off-Hook timeout ||(no active report)<br />(only failures)<br />(only changes)<br />(only failures)
 +
|-
 +
|align=center|5||[[BITMAP]][1..8]||Reporting Flags.<br />Bit 8 = VERBOSE.||colspan="2"|&nbsp;<br />Set by Tone Test started from station.
 +
|-
 +
|align=center|6||[[UINT1]]||Status information 1.||colspan="2"|Bits describing ab- and cd- wire errors
 +
|-
 +
|align=center|7||[[UINT1]]||Status information 2.||colspan"2"|TouchLine: Tone test signal/noise value.<br />Telephone: Wire monitor current.
 +
|-
 +
|align=center|8||[[NET_OBJ_REF]]||Entity Information field 1||colspan="2"|Directory Number.
 
|-
 
|-
 
|}
 
|}
 +
 +
[[Category: ACDP messages]]
 +
[[AlphaNet_Data_Protocol#General_Exchange_Control|Back to AlphaNet message list]]
 +
[[Category:Logging]]

Latest revision as of 15:13, 6 July 2022

AI.png
STATUS_REPORT 0x0072 114 AMC 07.30
Report equipment Presence and Error/OK status for Subscriber Lines, Audio Links, Devices, Boards, etc. Intended for remote logging and external monitoring systems.

As the message is very general, the message definition will be followed by a detailed example of how the different parameters are used for each “entity” type. Unused parameters/flags are always set to 0.

AlphaCom can be programmed to forward STATUS_REPORT messages to two addresses. See Exchange_&_System_(AlphaPro)#Logs_and_Errors, "System Log and Error Reports to".

1 NET_OBJ_REF
{ECL_STATION,
ECL_AUDIO_RING,
ECL_AUDIO_LINK,
ECL_BOARD,
ECL_DEVICE,
ECL_NODE}		 Entity Reference to the Station / Inter­Exchange Link / ICC Audio Ring / Board / Device / Exchange the status message is for.
The entity number is a logical number, e.g. station from 1 to 552.
2 NET_OBJ_REF
{NRF_PHYS_ADDR}		 Physical address for the entity defined in parameter 1.
This is a hardware module/board/port type of information.
3 BITMAP[1..8] (Error) State Flags.
Bit 1 = Interface present:
Bit 2 = Interface test:
Bit 4 = Signaling test:
Bit 6 = Audio test:
Bit 7 = Device dependent test		  
Board present in exchange
Board reports entity missing/down
Last signaling test failed
Last audio (tone) test failed
 
4 BITMAP[1..8] (State) Change Flags.
Each bit is set if the corresponding state flag bit was changed from the previous report and cleared if it was unchanged.
5 BITMAP[1..8] Reporting Flags.
Bit 8 = VERBOSE. The report is from a manually/externally started test, where the user wants a complete report.
6 UINT1 Extra (Error) Status Information 1.
7 UINT1 Extra (Error) Status Information 2.
8 NET_OBJ_REF
(optional)		 Entity Information field 1.
.
STATUS_REPORT for Stations:
1 NET_OBJ_REF Station from 1 to 552.
The Sub Class field specifies the type of station interface (TouchLine, Telephone).
Status info. can have different meaning for each Sub Class.
2 NET_OBJ_REF Physical address: Module/board/port.
The (Implicit Type) Resource Address format is used
3 BITMAP[1..8] (Error) State Flags.
Bit 1 = Interface present:
Bit 2 = Interface test:
Bit 6 = Audio test:
Bit 7 = Device dep. test:		 ---What is reported for Stations:---
ASLT/ATLB board missing
ASLT/ATLB wire monitoring
Tone Test
Handset Off-Hook timeout		 (no active report)
(only failures)
(only changes)
(only failures)
5 BITMAP[1..8] Reporting Flags.
Bit 8 = VERBOSE.		  
Set by Tone Test started from station.
6 UINT1 Status information 1. Bits describing ab- and cd- wire errors
7 UINT1 Status information 2. TouchLine: Tone test signal/noise value.
Telephone: Wire monitor current.
8 NET_OBJ_REF Entity Information field 1 Directory Number.

Back to AlphaNet message list

Retrieved from "https://wiki.zenitel.com/w/index.php?title=STATUS_REPORT&oldid=230339"