Group Call - Increased volume: Difference between revisions

Latest revision as of 14:22, 11 August 2022

This article describes how to increase the volume of a group call announcement. The volume is set back to default value when the group call is ended.

Prerequisites

This event is CPU extensive. Maximum members in a group using this feature should not exceed approx. 50 stations. (Not applicable for ICX-AlphaCom)
Minimum software: AMC version 11.

Configuration

In the following example the volume will be set to level 6 when group call 86 is called from stations in UDP group 2. The volume is set to level 3 (default) when the group call is ended.

When stations outside UDP group 2 dial group call 86 this event will not be triggered, and the volume will not be altered.

In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:

Action commands:

IF %chg(1,0)
tmp 0 "%gns(3,0)"
LOOP
IF %op(%tmp(0),=,0)
STOP
ENDIF
$VOL N%tmp(0) U6
tmp 0 "%gns(3, %tmp(0))"
ENDLOOP
STOP
ENDIF
tmp 0 "%gns(3,0)"
LOOP
IF %op(%tmp(0),=,0)
STOP
ENDIF
$VOL N%tmp(0) U3
tmp 0 "%gns(3, %tmp(0))"
ENDLOOP

In the action strings above, there are two lines that defines the volume. Volume during group call is set to 6 (U6) by the command:

$VOL N%tmp(0) U6

Volume is set to 3 (U3) when the group call is ended by the command:

$VOL N%tmp(0) U3

U6 and U3 can be changed to other values if required.

In %gns(3, %tmp(0)) in the example, the 3 stands for group 3 (86), and must be changed if a different group is used.

Note that a standard feature exists, which might be a better alternative: Group calls with "Setup Priority = Alarm" will automatically use the Volume Override feature of the ICX-AlphaCom, without any additional configuration required.

@@ Line 1: / Line 1: @@
-This article describes how to increase the volume of a group call announcement. The volume is set back to default value when the group call is ended.
+{{AI}}
+This article describes how to '''increase the volume of a group call''' announcement. The volume is set back to default value when the group call is ended.
-'''Note''': This event is CPU extensive. Maximum members in a group using this feature '''should not exceed approx. 50 stations'''.
+== Prerequisites ==
+* This event is CPU extensive. Maximum members in a group using this feature '''should not exceed approx. 50 stations'''. (Not applicable for ICX-AlphaCom)
+* Minimum software: AMC version 11.
-Minimum software is AMC version 11.
+== Configuration ==
+In the following example the volume will be set to level 6 when group call 86 is called from stations in [[UDP group]] 2. The volume is set to level 3 (default) when the group call is ended.
-In the following example the volume will be set to level 6 when group call 86 is called from stations in UDP group 2. The volume is set to level 3 (default) when the group call is ended.
+When stations outside UDP group 2 dial group call 86 this event will not be triggered, and the volume will not be altered.
-In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event (the action strings can be copy/paste into AlphaPro):
+In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|'''Exchange and System''' -> '''Events''']], press '''Insert''' and create the following event:
+[[File:Application14a.png|500px|left|thumb]]
-------------
+<br style="clear:both;" />
-{|
-|-
-|width="150pt"|'''Event Owner''':
-|width="400pt"|Stations with UDP: Id: 2
-|-
-|'''Event type''': || [[Conversation Outgoing (Event Type)|08 - Conversation Outgoing]]
-|-
-|'''Sub event''': || 0
-|-
-|'''When change to''': || ON or OFF
-|-
-|'''When related to''': || Directory Number, Id: 86
-|-
-|'''Action:''' || &nbsp;
-|-
-|}
+{{Code2|
   IF %chg(1,0)
-  tmp 0 "%gns(%2.phy,0)"
+  tmp 0 "%gns(3,0)"
   LOOP
-  IF %op(%tmp(0),=,0)
+  IF %op(%tmp(0),<nowiki>=</nowiki>,0)
   STOP
   ENDIF
   $VOL N%tmp(0) U6
-  tmp 0 "%gns(%2.phy, %tmp(0))"
+  tmp 0 "%gns(3, %tmp(0))"
   ENDLOOP
-  stop
+  STOP
   ENDIF
-  tmp 0 "%gns(%2.phy,0)"
+  tmp 0 "%gns(3,0)"
   LOOP
-  IF %op(%tmp(0),=,0)
+  IF %op(%tmp(0),<nowiki>=</nowiki>,0)
   STOP
   ENDIF
   $VOL N%tmp(0) U3
-  tmp 0 "%gns(%2.phy, %tmp(0))"
+  tmp 0 "%gns(3, %tmp(0))"
   ENDLOOP
+}}
+In the action strings above, there are two lines that defines the volume. Volume during group call is set to 6 (U6) by the command:
+{{Code|$VOL N%tmp(0) U6}}
-There are two lines that defines the volume. Volume during group call is set to 6 (U6):
- $VOL N%tmp(0) U6
-Volume is set to 3 (U3) when the group call is ended:
+Volume is set to 3 (U3) when the group call is ended by the command:
- $VOL N%tmp(0) U3
+{{Code|$VOL N%tmp(0) U3}}
 U6 and U3 can be changed to other values if required.
+In %gns(3, %tmp(0)) in the example, the 3 stands for group 3 (86), and must be changed if a different group is used.
-Also note that group calls with "Alarm Priority" will automatically use the [[Volume and handset override|Volume Override feature]] of the AlphaCom, without any additional configuration required.
+Note that a standard feature exists, which might be a better alternative:
+Group calls with "[[Groups#Group_Call_Setup_Priority|Setup Priority = Alarm]]" will automatically use the [[Volume and handset override|Volume Override feature]] of the ICX-AlphaCom, without any additional configuration required.
-<br><br>
-[[Category:Applications]]
+[[Category:AlphaCom Applications]]
+[[Category:ICX-AlphaCom Applications]]
+[[Category:Applications using Event Handler]]

Group Call - Increased volume: Difference between revisions

From Zenitel Wiki

Latest revision as of 14:22, 11 August 2022

Prerequisites

Configuration