Difference between revisions of "1-1c. AlphaPro - Getting started (solution)"
From Zenitel Wiki
(→Send the changes) |
|||
Line 26: | Line 26: | ||
====Send the changes==== | ====Send the changes==== | ||
* Connect the PC to ethernet port 0 of the AlphaCom | * Connect the PC to ethernet port 0 of the AlphaCom | ||
− | *In AlphaPro | + | *In AlphaPro click on ''SendAll'' |
*You will be prompted to log in | *You will be prompted to log in | ||
**Default username: '''''admin''''' | **Default username: '''''admin''''' | ||
**Default password: '''''alphaadmin''''' | **Default password: '''''alphaadmin''''' | ||
− | + | *The whole database will now be sent to the exchange. When it is finished, click ''Close'' | |
− | |||
− | *The whole database will now be sent to the exchange. When it is finished, click '' | ||
===Test=== | ===Test=== |
Revision as of 13:00, 13 February 2014
AlphaPro
- Install AlphaPro on a computer
- Start AlphaPro by doubleclicking the AlphaPro icon on your desktop
- You will be prompted to create a new Network and a new Exchange
- Write in a suitable Network and Exchange name
- Click Ok
Configure Names & Numbers
- In AlphaPro go to Users & Stations in the main menu
- Select physical number 1; 101 SystemStat.
- Use the section on the right and change the directory number to 416
- You will be prompted that this number already exist, and if you want to replace it. Click Yes
- Change the name to Reception, click Ok
- Select physical number 2; 102 Station 2
- Use the section on the right and change the directory number to 6540
- Change the name to T. Edison, click Ok
Send the changes
- Connect the PC to ethernet port 0 of the AlphaCom
- In AlphaPro click on SendAll
- You will be prompted to log in
- Default username: admin
- Default password: alphaadmin
- The whole database will now be sent to the exchange. When it is finished, click Close
Test
- Check that the displays on the two master stations show 416 Reception and 6540 T. Edison
- On the reception station dial 6540 and observe that the call is connected. Test both incoming and outgoing audio
- On the T. Edison station dial 416 and observe that the call is connected. Test both incoming and outgoing audio