Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"
From Zenitel Wiki
(→Configure the AlphaCom XE) |
(→Configure the AlphaCom XE) |
||
Line 16: | Line 16: | ||
*In AlphaPro go to '''Users & Stations''', and select physical number 41; 141 Station 41 | *In AlphaPro go to '''Users & Stations''', and select physical number 41; 141 Station 41 | ||
*Use the section on the right and change the configuration as follows: | *Use the section on the right and change the configuration as follows: | ||
− | [[File:1-3d | + | [[File:1-3d solution1.PNG|thumb|left|400px|AlphaPro: Users & Stations window]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 17:54, 22 March 2011
Install and configure the SoftClient
- Download the file SoftClientSetup.msi from e.g. AlphaWiki or from Partnernet, and install it on the PC
- Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
- Start the SoftClient, and select File -> Preferences, and set these parameters:
- Save Settings
- Select Configure Audio Device to adjust speaker and microphone levels
Configure the AlphaCom XE
- In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom XE
Troubleshooting
- If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations