AlphaPro 11.6.x - Release Notes

NOTE: Since AlphaPro version 11.5.x.x there is no support for serial communication which is needed to configure AMC9. For AMC9 and mixed networks AlphaPro 11.2.x.x must be used!

AlphaPro 11.6.3.11

Release date: 10.05.2017
NOTE: This is not an upgrade to v11.6.3.x versions. It can be installed alongside older 11.6.3.x versions.
See also NOTE's for v11.6.3.1

Functional Changes

MTN 1053: Auto-Attendant timeout is now configurable from AlphaPro

Timer setting for auto-attendant timeout added in Exchange & System > System > Timers tab.

Errors Corrected

MTN 1099: Not possible to change IP address on ethernet ports in AlphaPro 11.6.3.9

On a converted database it sometimes is impossible to change eth0 and eth1 IP address without deleting NetRouting and reindex the database.

MTN 998: Help function in AlphaPro fixed

Selecting Help from the file menu, or pressing F1 did not generate any help feature

MTN 1157: Increased DAK string length

The DAK string length is increased from 19 to 25 characters.

AlphaPro 11.6.3.10

Release date: 18.04.2017

NOTE: This is an upgrade to v11.6.3.x versions, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.x before this version is installed.
See also NOTE's for v11.6.3.1

Errors Corrected

Problem with corrupted Routing table key file

In certain cases, the Routing.cdx file could be corrupted. Specially saving data in the Exchange->System window could cause corruption in the .cdx file.

AlphaPro 11.6.3.9

Release date: 03.06.2016
NOTE: This is an upgrade to v11.6.3.x versions, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.x before this version is installed.
See also NOTE's for v11.6.3.1

Functional Changes

Portoguese Autoload database

Portoguese language is now available as Autoload language

AlphaPro 11.6.3.8

Release date: 10.03.2015
NOTE: This is an upgrade to v11.6.3.x versions, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.x before this version is installed.
See also NOTE's for v11.6.3.1

AlphaPro 11.6.3.7

Release date: 01.10.2014
NOTE: This is an upgrade to v11.6.3.x versions, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.x before this version is installed.
See also NOTE's for v11.6.3.1

AlphaPro 11.6.3.6

Release date: 13.05.2014
NOTE: This is an upgrade to v11.6.3.4/11.6.3.5, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.4/11.6.3.5 before this version is installed.
See also NOTE's for v11.6.3.1

AlphaPro 11.6.3.5

Release date: 28.04.2014
NOTE: This is an upgrade to v11.6.3.4, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.4 before this version is installed.
See also NOTE's for v11.6.3.1

AlphaPro 11.6.3.4

Release date: 04.02.2014
NOTE: This is an upgrade to v11.6.3.3, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.3 before this version is installed.
See also NOTE's for v11.6.3.1

Functional Changes

MTN 424: Added fields to the CSV file import function

Import from .csv: Added more options to the Import from .csv function. The new format is:

<directory number>;<id number>;<groups>;<group access level>;<cos>;<display text>;<udp groups>;<exp parameter>;;<mail in idle>;<global>;<ccoip>;<dak>;<station type>

where

<groups> can now contain a list of groups separated by comma: ..;1,2,30;..

<udp groups> can contain a list of udp groups separated by comma: ..;1,8;..

, <mail in idle>, <global> and <ccoip> is either 0 or 1 for respectively unchecked and checked

<dak> is a list of DAK key strings separated by comma: ..;1:I60,2:I640;..

Each DAK key string is prefixed by DAK key number, so that the example above will result in the DAK key string I60 being programmed to DAK key 1 and I640 being programmed to DAK key 2. To delete existing DAK keys, use ..;9:,10:;... Here DAK keys 9 and 10 will be deleted.

<station type> indicates station type, where

• 0 (or missing) = Master Station
• 1 = Sub Station
• 2 = PNCI
• 3 = CRM
• 4 = Display Station
• 5 = Dual Display
• 6 = Custom 2

If the <global> field is 1, the <directory number> will be added as a feature 83 number with the <id number> as node number. If the <global> field is 0 (or empty), the <directory number> will be added as a feature 9 number with the <id number> as physical number. If a global number is added, only <directory number>, <id number> and <display text> are used. All other fields are ignored.

If the <ccoip> field is 1, the station with physical number = <id number> will be set to be an CCoIP station. If the field is 0 (or empty) the station will keep the CCoIP setting it had before the import process.

AlphaPro 11.6.3.3

Release date: 09.07.2013
NOTE: This is an upgrade to v11.6.3.2, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.2 before this version is installed.
See also NOTE's for v11.6.3.1

Errors Corrected

Other corrections:

• GetAll: Last element of some tables (dupconf, extdev, programs, ggroups, rcoaddr, simpconf, users, stations) was not written to the database after GetAll.
• Serial Port Setup: The display of Stop Bits could in some situations become faulty (blank).

AlphaPro 11.6.3.2

Released date: 08.05.2013
NOTE: This is an upgrade to v11.6.3.1, and should be installed in the same directory. It is not necessary to uninstall v11.6.3.1 before this version is installed.
See also NOTE's for v11.6.3.1

Errors Corrected

MTN 278: Not possible to add events from user window

Corrected.

MTN 280: Changing a station dirno from Directory & Features causes duplicated users and dirno's

Corrected.

AlphaPro 11.6.3.1

Released date: 26.04.2013
NOTE: This is not an upgrade to AlphaPro 11.5.3.x, and should not be installed on top of older AlphaPro versions.
NOTE: This version have some new fields in the database, so databases from older version will be converted.
NOTE: The default installation path for this version is 'c:\Users\<username>\Applications\AlphaPro'. This is only a suggestion, you can install to any directory you like.

Errors Corrected

MTN 45: Scheduler: Wildcard characters are not allowed in time or date

Corrected the support for wildcard characters in Time/Date fields

MTN 46: SendAll fails sometimes

Caused by AlphaPro holding some database file(s) open. Improved the closing of files procedure (in AlphaPro) before Wacs is started.

MTN 55: 'Cancel mail for callback threshold' is set to 0, not 255

Corrected.

MTN 59: Deleted numbers and names still appears in the DAK window

Corrected. This issue was also present for Group, Pager and Group Excl windows.

MTN 126: '§' becomes '?' after GetAll

Fixed by using UTF7 Encoder to convert the nvram-values to a string.

MTN 182: Current group members are deleted when adding new member

The SendChange procedure only read changed records from GroupMembers table. All members needs to be read/updated if a Group has changes in its members list.

MTN 214: Related to in a scheduler event will also be related to in next event

Corrected.

MTN 241: Impossible to delete 60 - info menu - feature 21/0 from AMC

Corrected.

MTN 223: Feature 021 Enter Menu DirNumber 60 will not be shown in This Alphapro

Same as MTN-241.

MTN 224: Global group members are not deleted

Corrected.

MTN 119: SIP node becomes AlphaCom node after GetAll in new database

Corrected.

MTN 235: AlphaCom eth0 and eth1 ip addresses get deleted in alphapro

Could be caused by setting the eth0/eth1 IP addresses in AlphaPro different (switched) from AlphaWeb. AlphaPro no longer read IP-addresses from connected node during GetAll.

Enhancements

MTN 161: New flags and labels for AlphaPro

SX conference flag

ON = Report current speaker to SysLog statistics, OFF = no statistics. Default OFF

Event Handler Events:

38 Dynamic group inclusion
39 Additional call info
40 Recording Event

Station Flags

ON = Avoid increasing volume for Tone test
(Station/user->Line monitoring menu)

System flag:

Recording on demand
(System-> Recording)

Other Issues

MTN 60: AlphaPro connects to IP 0.0.0.0 when using customized Autoload database

Won't fix. This is caused by the Custom autoload not being of the latest version. A couple of fields in the Exchange table is missing. To update to the latest version: Create a new database by using the custom autoload, and copy the newly created database files back to the Autoload directory.