Difference between revisions of "Recording Event (Event Type)"
From Zenitel Wiki
(→Event description) |
|||
Line 4: | Line 4: | ||
|- | |- | ||
|width="150pt"|'''Event Owner''': | |width="150pt"|'''Event Owner''': | ||
− | |width="600pt"| Station initiating the recording feature | + | |width="600pt"| Station initiating the recording feature. |
|- | |- | ||
|'''Event type''': || 40 - Recording Info | |'''Event type''': || 40 - Recording Info | ||
Line 17: | Line 17: | ||
|- | |- | ||
|} | |} | ||
+ | |||
+ | |||
+ | Regarding the Event Owner: | ||
+ | * The owner of the event is the A-station in a conversation, or the initiator of group call. | ||
+ | * For Simplex conference, station "1" is always the owner. "Related To" is the conference directory number, e.g. "8201". | ||
==Additional information== | ==Additional information== |
Revision as of 11:29, 25 January 2017
Event description
Event Owner: | Station initiating the recording feature. |
Event type: | 40 - Recording Info |
Subevent: | Information type, see list below |
When change to ON: | When state is reported. |
When change to OFF: | Only for sub event 0 when recording ends. |
When related to: | Participant of the recording session. (B station, group call etc.) |
Regarding the Event Owner:
- The owner of the event is the A-station in a conversation, or the initiator of group call.
- For Simplex conference, station "1" is always the owner. "Related To" is the conference directory number, e.g. "8201".
Additional information
- Sub-event 0: ON = Recording "process" starts. OFF = Recording "process" stop. (This does not mean that the actual recording is taking place. For "recording on demand" the ON event will trigger when conversation starts, sub event 1 or 2 will trigger when or if $REC start the recording.)
- Sub-event 1: ON = The Recorder "1" reply "OK" to recording audio session. (This means the "physical" recording starts)
- Sub-event 2: ON = The Recorder "2" reply "OK" to recording audio session. (This means the "physical" recording starts)
- Sub-event 10: ON = No response from any of the recorders, this means the recording is failing at start up.
- Sub-event 11: ON = Recorder terminated the recording session before the "audio" recording session was ended at AlphaCom side.
Available from alphasys 11.2.3.1.