Difference between revisions of "%1.exp"
From Zenitel Wiki
| Line 9: | Line 9: | ||
[[Event_Handler#Formating|Formating]] of the returned data is supported. | [[Event_Handler#Formating|Formating]] of the returned data is supported. | ||
| − | |||
| − | Examples | + | |
| + | |||
| + | '''Note:''' The macro cannot be followed by a character a-z, A-Z. this will result in a syntax error. Either a space character must be used, or the macro can ve followed by empty brackets. | ||
| + | |||
| + | Examples, assuming that the UDP field contains "4321": | ||
%1.exp = 4321 | %1.exp = 4321 | ||
%1.exp Ma = 4321 Ma | %1.exp Ma = 4321 Ma | ||
Revision as of 14:03, 7 June 2013
%1.exp
Returns the User defined parameter as enterened in AlphaPro, Users & Stations -> UDP tab.
- %2.exp can be used to read the UDP of the "Related-to" station. In AlphaNet this is supported when the station is in the local exchange where the event is executed.
Formating of the returned data is supported.
Note: The macro cannot be followed by a character a-z, A-Z. this will result in a syntax error. Either a space character must be used, or the macro can ve followed by empty brackets.
Examples, assuming that the UDP field contains "4321":
%1.exp = 4321 %1.exp Ma = 4321 Ma %1.exp()Ma = 4321Ma %1.expMa = Syntax error