Actions

Difference between revisions of "CRM V - Control Room Master"

From Zenitel Wiki

(Incoming Conversation)
(Incoming Conversation)
Line 128: Line 128:
  
  
To turn on the green led in the assosiated DAK key when an incoming call is received, create this event:
+
To turn on the green led in the associated DAK key when an incoming call is received, create this event:
  
 
[[Image:CRM 3.PNG|left|500px|thumb]]
 
[[Image:CRM 3.PNG|left|500px|thumb]]

Revision as of 14:25, 4 June 2015

CRM V - Control Room Master Module
CRM V with all optional modules

Features

  • Made for Critical Communication over IP - CCoIP in a control room environment
  • Large high contrast display with white backlight for excellent readability
  • Superb audio technology - gives loud-speaking hands free duplex communication from any location in the room
  • White light behind all keys for excellent readability in dark environments
  • Optional noise cancelling goose-neck microphone
  • Optional handset unit
  • Integrated Web server for easy configuration and monitoring
  • Remote automatic software update
  • Clean relay output contact for control of external equipment

Portfolio

Installation

For installation of the CRM V, and connecting additional modules please see the IP Station Installation article.

Handset mounting

See: Handset installation and mounting

DAK48 Expansion module

See: D48 Installation and Mounting

Headset use

See: IP Flush Master and Headset

Gooseneck mounting

See: Gooseneck Microphone Installation and Mounting

Station Type

By setting a station to Station Type: CRM in AlphaPro the display layout will change from the standard two line display to a four line display.

CRM 5.PNG


The display on the station will instead of showing the date, time and station number and name, only show the date and time in the top line. Line 2 and 3 are used for the queue navigation, and line 4 is used for labelling the navigation keys when there is an entry in the queue.

The CRM station type selection will also turn on the backlight constantly.

Queue Navigation

Incoming mails (typically Call Requests) to a CRM station will form up a queue in the order they are coming in, where the last mail is at the bottom. All incoming mails have a priority (0-255), and a mail with priority higher than the ones in the queue already will go straight to the top. The four navigation keys below the display can be used to navigate the queue, and will be visible only when there are any entries in the queue.

The default navigation keys for a CRM are (from left to right):

  • 7638 = Answer (Answer the highlighted mail by calling back to it)
  • 7639 = Next (Go to the next mail in the queue)
  • 7632 = Top (Go to the first mail in the queue)
  • 7630 = Delete (Delete the highlighted entry)

The navigation keys can be configured using AlphaPro:

Users & Stations → DAK: Queue operation codes


The queue for two line display stations can be navigated with:

  • 0 = Delete entry
  • 2 = Step to top
  • 3 = Step to last
  • 7 = Step to next entry
  • 8 = Answer current mail
  • 9 = Step to previous entry

LED Control

The IP Flush Master has four DAK keys. In addition the station can be fitted with up to two DAK-48 panels to make a total of 100 DAK keys. of which all have two LED's each.

CRM 14.PNG


The two LED's (red and green) can be controlled individually using the IND command in the Event Handler.

Typical events to control LED's:

Call Request

To turn on the red led, flashing fast, in the associated DAK key when a Call Request is received, create this event:

CRM 1.PNG


Event Owner: The CRM-V station or a group of CRM-V stations Enter the physical station number or the UDP group number
Event type: 10 - Received mail
Subevent: N/A
When change to: ON or OFF
When related to: All
Action: IND %1.phy %1.dak(I%2.dir) 1 3 Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"



Outgoing Conversation

To turn on the green led in the associated DAK key when an outgoing call is made, create this event:


CRM 2.PNG


Event Owner: The CRM-V station or a group of CRM-V stations Enter the physical station number or the UDP group number
Event type: 08 - Conversation - Outgoing
Subevent: N/A
When change to: ON or OFF
When related to: All
Action: IND %1.phy %1.dak(I%2.dir) 2 1 Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"

Incoming Conversation

To turn on the green led in the associated DAK key when an incoming call is received, create this event:

CRM 3.PNG


Event Owner: The CRM-V station or a group of CRM-V stations Enter the physical station number or the UDP group number
Event type: 07 - Conversation - Incoming
Subevent: N/A
When change to: ON or OFF
When related to: All
Action: IND %1.phy %1.dak(I%2.dir) 2 1 Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"

Door Status

An input of the IP substation can be connected to a door magnet, providing indication on the DAK panel, showing if the door is open or closed.

Example:
To turn on the red led in the associated DAK key when input 3 of the station is activated, create this event:

CRM 4.PNG


Event Owner: The Door Station or a group of Door stations Enter the physical station number or the UDP group number
Event type: 30 - Station DAK key as RCI
Subevent: 3 Equal to the IP station input that is used
When change to: ON or OFF
When related to: All
Action: tmp 0 "%1.dir" Temporarily store the station directory number
  OWN 105 Set the CRM directory number as owner of the event
  IND %1.phy %1.dak(I%tmp(0)) 1 1

Station Down

CRM 15.PNG


Event Owner: A group of stations Use UDP group 8 for all stations
Event type: 13 - Faulty station line
Subevent: 0
When change to: ON or OFF
When related to: N/A
Action: tmp 0 "%1.dir" Temporarily store the station directory number
  OWN 105 Set the CRM directory number as owner of the event
  IND %1.phy %1.dak(I%tmp(0)) 1 1
  IND %1.phy %1.dak(I%tmp(0)) 2 1

This will turn on the red and green led in the assosiated DAK key as long as the station is reported down.

DAK Redirection

DAK Layout


Unused DAK tables from other stations must be borrowed to extend the CRM DAK table. CRM's using the same DAK layout can redirect to the same tables.

Redirecting DAK table to physical 501, 502 ... 510


The DAK key configuration must be performed at the users DAK table to which the original CRM DAK table is pointing:

CRM 12.PNG


Here DAK 91-100 is shown configured from the DAK table at physical #510


Transfer

Manual:

  • Transfer calls is done by using the feature code 71 + destination directory number
  • Call Requests must be transferred using the feature code 7870 + destination directory number
  • To reset the transfer dial 70.

Automatic: A typical CRM application is to transfer calls and call requests from a local guard to a main guard. In the example below two scenarios are shown:

1: The local guard is leaving his station for a while and transfers all calls and call requests to the main guard (directory number 110) by pressing D1 (DAK 1).

DAK 1 is configured with an event trigger:

CRM 16.PNG


When a CRM station presses D1 an event trigger (9534) is dialled triggering an event:

CRM 17.PNG


Event Owner: The CRM-V station or a group of CRM-V stations Enter the physical station number or the UDP group number
Event type: 15 - Event Trigger Feature
Subevent: 0
When change to: ON
When related to: Directory Nnumber: 9534
Action: IF %udd(%1.dir) Toggle function: checks transfer status
  $TRF L%1.dir "" Remove call transfer
  $SCRT L%1.dir Remove Call Request transfer
  IND %1.dir %1.dak(I%2.dir) 1 1 OFF Turn off red LED in D1
  LOG "Transfer deactivated from %1.dir %1.nam to Main Guard" Log the action
  WUDD %1.dir 0 Toggle function: set transfer status to off
  STOP
  ENDIF
  $TRF L%1.dir "I110" Set call transfer to Main Guard
  $SCRT L%1.dir L110 Set Call Request transfer to Main Guard
  IND %1.dir %1.dak(I%2.dir) 1 1 ON Turn on red LED in D1
  LOG "Transfer activated from %1.dir %1.nam to Main Guard" Log the action
  WUDD %1.dir 1 Toggle function: set transfer status to on

See also:

Additional Settings

Autosearch

Calls and Call Requests can be forwarded automatically to a predefined receiver if unanswered :

Users & Stations → Automatic Search


Users & Stations → DAK


Audio Indication

See: Call Request Notification when Station type is set to CRM
Default Priority level    Arrival notification    Queue notification
-----------------------------------------------------------------------
  0 –  59                 No tone                 Beep every minute
 60 – 119                 Dut-dut-dut tone        Beep every minute
120 – 149                 Dut-dut-dut tone        Urgent Feature Reminder (configurable)
150 – 255                 No tone                 Private ringing tone

To configure the Urgent feature reminder:

Exchange & System → System → Calls and Options


To change the default priority levels:

Exchange & System → System → Calls and Options


Applications

See Category: Control Room Applications