1-4j. RCO, Call indication (solution): Difference between revisions
From Zenitel Wiki
(Created page with "left|thumb|500px|System configuration <br style="clear:both;" /> === Solution === '''Private Ringing indication''' ''*When calling the Main Guard in...") |
|||
| Line 3: | Line 3: | ||
=== Solution === | === Solution === | ||
'''Private Ringing indication''' | '''Private Ringing indication''' | ||
''*When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.). | ''*When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).'' | ||
*The lamp should be turned off when the private ringing stops. | ''*The lamp should be turned off when the private ringing stops.'' | ||
* Use logical RCO 10 to operate the relay'' | ''* Use logical RCO 10 to operate the relay'' | ||
Revision as of 14:53, 29 June 2016
Solution
Private Ringing indication *When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.). *The lamp should be turned off when the private ringing stops. * Use logical RCO 10 to operate the relay
Call Queue indication
*When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
- The lamp should be turned off when there are no more calls in the queue.