Actions

Difference between revisions of "TA-10"

From Zenitel Wiki

(Dimensions)
Line 20: Line 20:
  
 
===<u>Dimensions</u>===
 
===<u>Dimensions</u>===
 
+
'''Dimensions (WxHxD)''': 100 x 50 x 40 mm
{|border="1"
+
'''Weight''': 0.1 kg
|width="250px"|&nbsp;
 
|width="250px"|'''Dimensions (WxHxD)'''
 
|width="150px"|'''Weight'''
 
|-
 
|TA-10 || 100 x 50 x 40 mm || 0.1 kg
 
|}
 
  
 
===<u>[http://www.zenitel.com/product/ta-10 Additional Documentation on Zenitel.com]</u>===
 
===<u>[http://www.zenitel.com/product/ta-10 Additional Documentation on Zenitel.com]</u>===
  
 
[[Category: Turbine Backboxes and accessories]]
 
[[Category: Turbine Backboxes and accessories]]

Revision as of 14:15, 3 January 2017

TA-10 is a Relay Module to be used with Turbine Industrial stations TFIE-x and the Turbine kits TKIE-x.

1008140100.PNG

Highlights

  • Designed for use with Turbine Industrial stations TFIE-x, and the Turbine kits TKIE-x
  • Fits inside the TFIE Industrial stations
  • Dual high-power relays (DPDT)
  • Up to 400VAC /48 VDC per relay
  • Up to 6A current per relay
  • Heavy-duty spring-loaded terminals with spare grounding terminals
  • Powered by Turbine Industrial stations (TFIE-x) or Turbine Extended Kit (TKIE-x)

Connection

  • Use the cable that comes with the TA-10, and connect one end to the Turbine Extended Board (Connector J2), and the other end to the TA-10 board as indicated in the drawing below
Connecting the TA-10 Relay Unit to a TFIE station or a TKIE kit


Configuration

In AlphaCom, the two relays must be mapped in the RCO table as pin 9 and pin 10. See RCO - Remote Control Output for more details.

Dimensions

Dimensions (WxHxD): 100 x 50 x 40 mm Weight: 0.1 kg

Additional Documentation on Zenitel.com