Difference between revisions of "MB-30G"
From Zenitel Wiki
(→Additional Documentation) |
|||
| Line 1: | Line 1: | ||
[[File:3005020033.PNG|thumb|500px]] | [[File:3005020033.PNG|thumb|500px]] | ||
| − | ===Highlights=== | + | ===<u>Highlights</u>=== |
* Electret Microphone, 2K ohm | * Electret Microphone, 2K ohm | ||
* 5-pin DIN plug | * 5-pin DIN plug | ||
| Line 7: | Line 7: | ||
* Length: 446 mm | * Length: 446 mm | ||
| − | ===Installation=== | + | ===<u>Installation</u>=== |
Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR | Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR | ||
| − | ===Configuration=== | + | ===<u>Configuration</u>=== |
Make sure "'''No accessory'''" under Accessory in the ECPIR web interface. | Make sure "'''No accessory'''" under Accessory in the ECPIR web interface. | ||
[[Image:ecpir3p_gooseneck_web.png|thumb|left|500px|ECPIR Gooseneck accessory setting]] | [[Image:ecpir3p_gooseneck_web.png|thumb|left|500px|ECPIR Gooseneck accessory setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | ===Dimensions=== | + | ===<u>Dimensions</u>=== |
[[File:MB-30G Dimensions.PNG|thumb|left|500px]] | [[File:MB-30G Dimensions.PNG|thumb|left|500px]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 07:03, 28 October 2016
Contents
Highlights
- Electret Microphone, 2K ohm
- 5-pin DIN plug
- For use in Public Address and Talk-Back Systems
- Length: 446 mm
Installation
Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR
Configuration
Make sure "No accessory" under Accessory in the ECPIR web interface.
Dimensions
