Difference between revisions of "Flowire"
From Zenitel Wiki
| Line 12: | Line 12: | ||
* DHCP enabled. If obtain an dynamic address, it comes in addition to the static address. | * DHCP enabled. If obtain an dynamic address, it comes in addition to the static address. | ||
* NMK Password: HomePlugAV0123 | * NMK Password: HomePlugAV0123 | ||
| + | |||
| + | MAC address range: 00:13:CB:0A:00:00 -> 00:13:CB:0A:80:00 | ||
== Reset to Factory defaults == | == Reset to Factory defaults == | ||
Revision as of 13:49, 1 March 2017
Flowire is based on the HomePlug AV power line communications specification, only using 24 - 48 V DC as the medium. It is a network bridge between Ethernet and a PLC link.
There are two variants
Factory defaults
- Static IP address : 169.254.1.10
- DHCP enabled. If obtain an dynamic address, it comes in addition to the static address.
- NMK Password: HomePlugAV0123
MAC address range: 00:13:CB:0A:00:00 -> 00:13:CB:0A:80:00
Reset to Factory defaults
Flowire can be reset to Factory defaults by pressing the button for 15 seconds. The recessed button is located next to the Ethernet connector.