Difference between revisions of "Flowire"
From Zenitel Wiki
| Line 4: | Line 4: | ||
There are two variants | There are two variants | ||
| − | * | + | * [[FCDC-1]] (1008080110 ) - with [[PoE]] - [https://www.zenitel.com/printpdf/product/fcdc1 datasheet] |
| − | * | + | * [[FCDC-2]] (1008080210) - without [[PoE]] - [https://www.zenitel.com/printpdf/product/fcdc2 datasheet] |
Revision as of 11:10, 6 September 2017
Flowire is based on the HomePlug AV power line communications specification, only using 24 - 48 V DC as the medium. It is a network bridge between Ethernet and a PLC link.
There are two variants
Factory defaults
- Static IP address : 169.254.1.10
- DHCP enabled. If obtain an dynamic address, it comes in addition to the static address.
- NMK Password: HomePlugAV0123
MAC address range: 00:13:CB:0A:00:00 -> 00:13:CB:0A:80:00
Software Upgrade
Reset to Factory defaults
Flowire can be reset to Factory defaults by pressing the button for 15 seconds. The recessed button is located next to the Ethernet connector. (Handled by managerd process.)