Actions

Difference between revisions of "VSIS-4.9 Release"

From Zenitel Wiki

(ENA2200 & ENA2400 - Exigo Network Amplifier)
Line 23: Line 23:
 
* [https://www.zenitel.com/product/ena2400-ac ENA2400-AC Product information]
 
* [https://www.zenitel.com/product/ena2400-ac ENA2400-AC Product information]
 
* [[:Category:Public Address - Network amplifiers|Network Amplifiers]]
 
* [[:Category:Public Address - Network amplifiers|Network Amplifiers]]
* [[TFIE-6|Configuration guide for TFIE-6]]
 
  
 
== AlphaCom software version 12.5.3.0 (May 2018) ==
 
== AlphaCom software version 12.5.3.0 (May 2018) ==

Revision as of 09:04, 30 May 2018

New firmware and Application Software (May 2018)

VSIS is an intercom solution software product package. The package includes:

  • Turbine firmware: Updated firmware for Turbine generation of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P, ENA amplifiers and Exigo IP speakers.
  • INCA firmware: Updated firmware for all INCA SoC based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station and IP Dual Display Station.
  • SDK for Pulse: Updated SDK for Pulse system.
  • VS-IMT: Updated Intercom Management Tool PC application.
  • VS-Client: Updated VS-Client

Major new features

  • Multicast IP paging for SIP
    Turbine and INCA IP intercom stations and IP speakers now support IP multicast audio when configured in SIP mode. Up to 10 multicast IP addresses can be configured.
  • Virtual I/O script execution based on input status change
    Now you can enable/disable functions like DAK key action (e.g., make a call) according to a state change on certain input. Use cases: disabling intercom for non-authorized personnel using a badge-reader or denying intercom calls without a vehicle in front of the station (detected by a loop into the floor).
  • Advanced Turbine AVC settings on StationWeb
    We have exposed advanced AVC settings on Turbine StationWeb for AVC algorithm parametrization. These options should be used only in cases when the default AVC behavior needs to be fine-tuned and when the technician has a good understanding about the AVC technology.
  • We have added support for SIP Early Media during 180-Ringing or 183-Session Progress
    Now there is support for playing media during SIP 180-Ringing or SIP 183 Call progress, instead of a locally generated ringing tone. This is a very common setup in iPBX systems where the server generates media to be played during session progress and before call is accepted (e.g., call queued before it is answered).
  • We have made VS-IMT improvements
    VS-IMT will now display a warning when TCIV is set as a Pulse server, explaining the limitation and workaround. All DAK actions are now enabled for all Turbine stations, rather than being filtered by station type. We have also made many small bug-fixes and improvements.
  • We have made improvements to VS-Client
    We have introduced improvements to how the VS-Client manages system resources under a high system resources load, which should prevent any possible audible interruptions. We also have improved how the VS-Client takes ownership of audio devices; it could happen that the VS-Client locks an audio device such as a USB headset microphone in exclusive ownership, which can cause issues for other applications; this is now improved within the audio engine.


ENA2200 & ENA2400 - Exigo Network Amplifier

AlphaCom software version 12.5.3.0 (May 2018)

Some of the major new functionality included in 12.5.x.x is:

  • Support for ENA amplifiers
  • General bugfixes and improvements

For a complete list of bug fixes and functional changes and enhancements, see AMC-IP Release Notes
How to upgrade: AMC-IP software upgrade procedure

AlphaPro version 11.7.3.2 (May 2018)

New features (since 11.6.3.11):

  • Configuration of line volume level
  • Mixer station Work channel configuration
  • Menu item Help takes the user to AlphaWiki
  • New Icon for AlphaPro
  • Changed autoload: Directory number 0 - Telephone now points to a global number with node 101 (typical SIP node) instead of group 50.
  • Various bug fixes and improvements
  • NOTE: When installed for the first time, the Sentinel dongle driver must be installed separately. It is located in the \SentinelSystemDriver folder inside your AlphaPro installation directory.

For a complete list of bug fixes and functional changes and enhancements, see AlphaPro release notes