Difference between revisions of "IP-LCM Connections"
From Zenitel Wiki
| Line 10: | Line 10: | ||
Relay ratings: | Relay ratings: | ||
| − | * '''Outputs''': DPDT (NO, NC, COM) | + | * '''Outputs''': DPDT (Double Pole Double Throw). NO (Normal Open), NC (Normal Closed), COM (Common) |
* '''Switched voltage''': < 250VAC Rated (400VAC Max) | * '''Switched voltage''': < 250VAC Rated (400VAC Max) | ||
* '''Switched Voltage''': < 2000 VA max | * '''Switched Voltage''': < 2000 VA max | ||
Revision as of 13:38, 10 January 2019
Inputs
From the top left the inputs are numbered as pin 17 to pin 24. Each input has a corresponding input switch which toggles between closing contact and active input.
Outputs
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header.
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output.
Relay ratings:
- Outputs: DPDT (Double Pole Double Throw). NO (Normal Open), NC (Normal Closed), COM (Common)
- Switched voltage: < 250VAC Rated (400VAC Max)
- Switched Voltage: < 2000 VA max
- Switching Current: < 8A rated (15A max, 4s)
Indicators
Each output has a LED which indicates if the output is active or not.
See here for for information on the TKIS-2 kit connections