Difference between revisions of "Tamper switch"
From Zenitel Wiki
ZenitelAus (talk | contribs) (Tag: Visual edit) |
|||
| Line 1: | Line 1: | ||
{{AEIPS}} | {{AEIPS}} | ||
The Turbine IP Substation has the possibilty to be fitted with a tamper switch. Making it possible to raise an alarm if the station is dismounted from the backbox. | The Turbine IP Substation has the possibilty to be fitted with a tamper switch. Making it possible to raise an alarm if the station is dismounted from the backbox. | ||
| − | [[file:1008091010.png|200px|thumb|Tamper Switch<br>( | + | [[file:1008091010.png|200px|thumb|Tamper Switch<br>(1008091010)|alt=]] |
| − | == Configuration == | + | ==Configuration== |
In [[AlphaPro]], create this event for the Tamper Switch: | In [[AlphaPro]], create this event for the Tamper Switch: | ||
[[file:TamperSwitchEvent.png|500px|thumb|left|Event handler configuration]] | [[file:TamperSwitchEvent.png|500px|thumb|left|Event handler configuration]] | ||
| Line 12: | Line 12: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | == Mounting == | + | ==Mounting== |
Mounting instruction on Tamper Switch for [[IP Vandal Resistant Substation TKIE]] | Mounting instruction on Tamper Switch for [[IP Vandal Resistant Substation TKIE]] | ||
Revision as of 04:17, 21 October 2020
The Turbine IP Substation has the possibilty to be fitted with a tamper switch. Making it possible to raise an alarm if the station is dismounted from the backbox.
Configuration
In AlphaPro, create this event for the Tamper Switch:
The IP Substation must have I/O 3 defined as an input, which is the default setting.
Mounting
Mounting instruction on Tamper Switch for IP Vandal Resistant Substation TKIE
Step 1: Remove the two nylon nuts shown below
Step 2: Attach the supplied spacers
Step 3: Mount the tamper switch board
Step 4: Move the button GND wire from the the TKIE board to the tamper switch board
Step 5: Use the supplied wires to connect GND and Input 3 as shown below
